Walls and ceilings in rooms need an attractive appearance, so a person has always tried to take care of this. In the Stone Age, people diligently painted the vaults of caves, in the Middle Ages they wove tapestries, in the Baroque era they covered the walls with expensive silk. All these technologies involved the application of an ornament or plot image. The walls could not be monochromatic. Only in the Art Deco era did people begin to reconsider their attitude to the color and ornament of the walls. In 1925, at the Le Corbusier exhibition, the public saw for the first time in full white room. Then the Bauhaus artists proposed functionality as a new approach to style decision interior. Bright, light and plain walls became a symbol of the changed attitude to housing. However, at first, only the most expensive and sophisticated apartments decided on this, where the walls were perfectly aligned and painted with clean, rich colors. This testified to good taste the owner and his readiness for some victims of material and temporary inconvenience. Prepare the walls for painting, make them perfectly smooth only by the most highly qualified painters; in addition, it is somewhat longer than just wallpapering. The result, however, justifies all expectations.

When painting, it is important to know what result you want to achieve - and choose paint with this in mind. It is also necessary to take into account what influences the surface will be exposed to, how often it will be touched, how strong the touches can be, whether it will be washed. It is better to paint with latex, acrylic and acrylate matte paints. We can recommend you the following paints for glass wallpaper for painting, fiberglass, non-woven fabric and wallpaper for painting:

Joker (Joker): matte water-based paint Harmony: perfectly matt water-based paint for walls and ceilings Euro 7 (Euro 7): matte water-based paint for walls and ceilings Oasis Hall&Office: washable matte paint for halls and offices Dulux Bindo 7 - water-based paint for walls and ceilings Amphibolin (Amfibolin) Kaparol: universal water-based paint Beckers Elegant Takfarg: matte water-based ceiling paint Beckers Elegant Vaggfarg Helmatt: matte water-dispersion wall paint Elegant Vaggfarg Matt: Matte water-based wall paint Teknos Biora Balance: completely matte paint for interior decoration Any of these colors are on sale in our store. To buy paint for glass wall paper, fiberglass, non-woven fabric and paintable wallpaper, just dial any of our phone numbers, write to " Feedback"or chat with the store administrator through an online consultant. You can also purchase wallpaper for painting from us. Price can be viewed. We wish you a pleasant shopping and successful repair! VipKraska will help you choose materials.

With the advent of glass fiber on our market, everything has become much simpler. builders, at in the construction of houses (high-rise buildings) they do not pay much attention to the evenness of walls, ceilings and the appearance of microcracks during shrinkage of the house. Here we can breathe a sigh of relief and talk directly about cullet. This type wallpaper is a product high technology and has many advantages, due to which it is considered one of the the best materials for interior decoration. In Russia fiberglass wallpaper firstly spread in the design of offices, but today they are also popular in home interiors.

Glass fiber appeared on Russian market recently. This is a relatively new material for wall decoration, which has been successfully used abroad for about 50 years. The basis of this success is the external diversity of the material, the attractiveness of patterns, unlimited possibilities. color design and invincible strength of glass fiber. fiberglass attached additional rigidity lightweight coatings that are sensitive to impacts and shocks, such as drywall boards or rigid foam boards. The surface after gluing the fiberglass becomes strong and does not crumble, you can screw screws into it and drive in nails.

What are glass fiber

Glass fiber is a decorative wall covering similar in structure to fiberglass fabric. The initial material is a special glass, from which fibers are pulled at a temperature of 1200 ° C, then yarn of various types and thicknesses is formed, and then the material is woven. The raw materials for the production of glass fiber are mineral environmentally friendly materials: quartz sand, soda, lime, dolomite. Textured drawings are woven for glass wallpapers - in several variants of decorating in linen and twill weaving, and for painting fiberglass (spider webs) they simply produce a canvas. Glass fiber vary in density and pattern.

The famous Wellton glass wall papers have 60 texture options, and their number is constantly growing. Glass fiber have White color and intended for painting decorative paints after pasting. The quality of the surface allows them to be repainted many times. Texture options can be represented by samples: herringbone, sackcloth, gunny, diagonal, vertical, zigzag and others.

For pasting, use special adhesives for fiberglass wallpaper. Such adhesives are intended for any surfaces and have antiseptic properties.

Glass fiber is used in a variety of places: in homes, offices, restaurants, supermarkets, hospitals - wherever beautiful, durable surfaces are needed that do not require complex maintenance, and there are also anti- fire safety.

Properties of glass fiber, fiberglass, non-woven fabric and paintable wallpaper

Increased strength and durability. Glass fiber does not tear, does not scratch, reinforces the wall, prevents the appearance and growth of cracks, and withstands exposure to concentrated disinfectants. They are washable, do not accumulate static electricity, do not attract dust and can be left on the wall for up to 30 years.

Do not interfere with the movement of water vapor. Fiberglass wallpaper is a material knitted like a wool sweater. The open loop structure promotes the movement of water vapor, which improves climatic conditions indoors and allows the walls to "breathe".

Fire resistance. Glass fiber does not burn, which is an important requirement for the fire safety of premises, and when burned, unlike non-woven fabric, they do not emit toxic substances.

Variety of drawings and creativity. Various drawings allow you to choose an option that pleases the eye, and a variety of coloring methods provides an opportunity for the designer's imagination.

After gluing, a primer is applied to the surface of the glass wall paper so that the paint adheres better in the future. Once the primer is dry, any wall paint can be applied. It can be a dispersion paint with a matte and silky-mat surface (resistant to washing and abrasion) or an acrylic paint that forms a shiny, abrasion-resistant surface. Glass fiber can withstand repeated painting, which is also convenient. However, the finer the structure and the finer the pattern, the faster it will "smooth out" with several coats of paint. Thick fabrics completely retain their structure. Glass fiber can withstand almost all existing detergents. The only thing you need to pay attention to is the properties of the paint with which you cover the glass wall - not all paints can withstand even plain water.

What paint to choose for painting glass, fiberglass, interlining and wallpaper for painting?

This is written above. Now let's talk about what wallpaper is for painting.

Non-woven wallpaper

Most interesting view wallpaper for painting - non-woven wallpaper. To date, this is the most technologically advanced way of finishing imitating relief plaster. Interlining - nonwoven fabric made of cellulose, somewhat similar to fiberglass, but with a much finer structure. To the touch it reminds thinnest layer synthetic winterizer. When wet, this material does not lend itself to stretching or shrinkage, which naturally distinguishes it from paper counterparts. This material is not based on glass fiber, it is made from cellulose and textile fibers with a polymer binder. A layer of foamed cellulose is applied to the canvas, which forms the desired texture. Paint interlining is a non-woven material made of cellulose and textile fibers with a polymer binder, similar to glass fiber, but having a much finer structure, and as a result, smooth surface. Non-woven canvas is an alternative to gossamer (painting fiberglass) in those areas where durability and wear resistance are not required, for example, in inexpensive and "sparsely populated" offices. Painting interlining is environmentally friendly pure material and harmless to use, it does not contain PVC, it allows steam to pass through, like paper wallpaper, and besides, it is hardly flammable. This material perfectly hides defects.

It is possible to glue painting interlining on almost any surface: plaster (not crumbling), drywall, not removable old paint, plastic surfaces, old wallpaper bases, fiberglass, wood slabs and chipboard. It should only be taken into account that the surface must be dry, smooth, even, neutral color and homogeneous.

Fiberglass "gossamer"

Fiberglass "gossamer" is a non-woven material, which is a mesh of fiberglass, having a density of only forty grams per square meter. But, despite such a low density, this material has enormous tensile and tensile strength, which determines the scope of its application. In principle, glass fabric has been known for quite a long time, but in the construction industry it was previously used only in certain areas, and only recently has there been a real breakthrough in glass fabric in construction industry. One example of this is fiberglass "Spider line" (Wellton or Oscar).

Fiberglass, like a shell, holds the surface of a wall or ceiling, preventing the formation of cracks. It can be applied to many surfaces such as drywall, chipboard, brick, concrete, hardboard, wood and even metal. It is called the cobweb because of the external similarity. It is a decorative and at the same time reinforcing material for finishing surfaces in dry construction. Painting fiberglass is an ideal covering for rooms where a combination of aesthetic and reinforcing effects, strength and ease of maintenance, and compliance with fire safety requirements is required.

What is the difference between gossamer and glass fiber?

Gossamer, or painting fiberglass, has a lower density (35 - 50 g / m2, for glass - from 100 g / m2) and structure. The purpose of the web is to cover a wall or ceiling to smooth the surface, apply a finish, reinforce small cracks, and glass fiber is a material for final finishing. The gossamer is used to achieve a "marble" effect - a perfectly smooth wall. For this purpose, the "Wellton" web is most suitable, due to the very thin fiber and weaving structure. Different types cobwebs differ in structure and density. So, Wellton 45 g/m2 is a densely woven gossamer, ideal for any surface, and especially for "marble" walls; Oscar 50 g/m2 is a cheaper gossamer with a pronounced texture, while the lightweight series Wellton Light 30 g/m2, OSCAR LIGHT 25 g/m2 is a thinner type of gossamer.

What are the reinforcing properties?

Due to heating and shrinkage of the walls of buildings, the thinnest and network-like cracks can occur in the plaster, which are invisible when the walls are dry. Reinforcement with fiberglass eliminates this manifestation of cracks and creates a clean, flat surface. The gossamer gives strength to the top coat, closes cracks for a long time, is non-flammable, has high stability, and is very easy to use.

What paint to choose for painting glass, fiberglass, interlining and wallpaper for painting? Read above.

Wallpaper of the second grade - what is the difference between them and the first grade?

Among the series of cullet for thrifty buyers are usually offered economy class cullet and second grade cullet. Rolls of the second grade have a non-standard web length. When spinning fiberglass, failures sometimes occur - just like with conventional spinning. And manufacturers, removing a piece with a marriage, get rolls not 50 m long, but 15 and more. When using the second grade, you can make a horizontal joint. The same technique can be done with the first grade, and if you inadvertently cut a piece of the wrong length, or damaged the coating already on the wall, you can cut this piece and glue a new one.

Not enough rights to comment

The construction market pleases its customers with a huge number of building materials and tools. Because of this, people are increasingly doing repairs to their house or apartment on their own, thereby saving their time and money. In your building, you can do with your own hands not only the repair of worn parts, but also make a design improvement.

Wallpaper is part of the interior. They are of several types. Today, glass wallpapers, which are made using a special technology, are popular. Fiberglass wallpapers require periodic painting, but how to do it?

First you need to find out what are the advantages of glass fiber today:

• Glass fiber is made from a very durable material.
• It is based on special glass fabrics, which are famous for their wear resistance and are made from the most natural materials.
• Because of this, they do not harm your health and give the room a solid look.
• The wallpaper is also very durable., so nothing will happen to them from your pet's claws, scratches from strollers or bicycles.
• Glass fiber protected from fire, so there will definitely not be a fire in your house.
• In addition, you will save a lot on repairing and restoring your walls from cracks. or others negative factors, which ruin not only the interior of the room, but the whole house as a whole.
• Wallpapers are also protected from dirt, because they have antistatic materials in their composition.
• Walls on which glass wallpapers were glued (see How to glue glass wallpapers for painting: do it yourself) become protected from black mold and fungus, which will provide healthy life for many years.
• All over the world there are many different glass wallpapers with different patterns and textures.
• So that they can be repainted many times, you need to buy wallpaper with a deep relief so that the new paint does not overlap the previous one.

Advice. Also pay attention to the neat weaving of the wallpaper, because this is what indicates the irresistible quality of the material made.

Choosing a paint

Many well-known designers advise doing this in order to give the material itself brightness for design reasons.

First you need to decide how to paint the cullet, because there are different kinds paints from any manufacturers:

• This issue needs to be carefully considered, because the choice of paint is not such an easy task as it seems at first glance. The criteria for choosing paint for other materials is no different from choosing paint for glass.
• Here the main role is played by paints and varnishes, which should be paid the most attention.
• All specialists and experts in this field advise paints of water-dispersion compositions, because these are the ones that meet the main criteria for choosing a paint material.

Advice. If you want to give the wallpaper even more fire resistance, then paint it with acrylic paint. Any metal items that are near the wallpaper also need to be special treatment from fire.

Many people ask the same question: “How to choose glass wallpaper for painting and how to paint:

• As for glass wallpapers, you can buy any, and it is desirable to paint them with latex paints (see Latex paint: how to work with it) and acrylate compositions, because they will give the wallpaper a bright and sunny look.
• Pay attention to whether the paint is detergent, so that it is easier to clean the glass wall paper and that it does not peel off.

Here is a list of the most popular paint manufacturers in today's building materials market:

Judging by all of the above, you now know exactly what kind of paint to paint glass wall papers and from which manufacturer it is better to do it.

Measures before painting wallpaper

After this work, your home glass wallpapers will acquire a new and modern look.

You already know how to paint, now let's move on to the process itself:

• Treat the cullet with a special primer solution. It is he who will express the paint brighter.
• Use a roller (see ) to spread the paint evenly on the glass.

Applying a primer is a mandatory process before painting, because thanks to this, the effect of it will be 100 times better.

Types of paints

How to paint glass wall paper? Color options for this building material There are a few.

As mentioned above, it is desirable to distribute the paint over the wallpaper with a roller or spray gun. This is recalled, because the paint must necessarily lie flat on the wallpaper so that there are no lumps or unevenness.

Please note that two-layer staining is best suited here. After 12 hours after applying the first layer, you can proceed to the second.

Glass fiber is amenable to squeegee staining, using azure, stencils and borders. The first kind of painting can really bring your cullet to life.

How to paint this way

It is still done during gluing:

• Without waiting for the cullet to dry, you can immediately start making borders.
• Mark the width of the border on the wall and cut out a strip of glass. Paint two coats on the wall on either side of it.
• In the place where the width of the decorative border was marked, it can be safely glued.

The second painting method is suitable for creating patterns and patterns on wallpaper.

So:

• To do this, you need to select a specific pattern and outline it on the painted glass.
• This is done with masking tape. A stencil is placed that indicates the exact contours of the ornament.
• Apply paint to the glued tape. It is advisable to choose a background color paint so that there are no differences.

This is done as carefully as possible so that the adhesive tape does not come unstuck from the threads. paintwork material. After complete drying you can safely remove the tape. If you have the desire and patience, then you can process the finished drawing with an additional stencil or details.

How to paint glass wallpaper in this case

Any available specialty paint can be used.

Painting with azure is used to change the color of the wallpaper to some extravagant:

• Thanks to this method, it is possible to give glass wallpapers of various colors.
• When you have painted the wallpaper in any color, you need to apply azure with a flat brush.

This is done with short and transverse strokes. You can also apply two layers of azure to make the color more saturated.

The last method will be squeegee staining of glass, which is the simplest of all. It contributes to the original fabric presentation of your wallpaper. As the main coat of paint, use bright and warm colors. After it dries, apply a translucent varnish or any other substance that has a metallic effect.

Do not wait for the coating to dry for a long time. During this time, it is possible, for example, to clean the outer layer of paint and residues. Use spatulas to eliminate unevenness.

Using all these tips and methods, you will make elegant and solid not only your room, but also glass wall papers. What paint to paint, the methods of this process and the instructions were listed above.

Using glass wallpaper in your interior is a smart enough move, especially if you choose your own quality wallpapers for painting. In past articles, we have already talked about what distinguishes them from other similar finishing materials. In the same article, we will tell you about how to paint glass wall papers, because the finish layer on the wall should be made of paint.

Good paint is nice to carry out painting work

Suitable paints

We can confidently say that it is not at all difficult to paint the walls pasted over with glass wallpaper, you don’t even need to finish special courses for painters. However, it is advisable to choose suitable paint for walls so that it looks great and holds well.

I would like to say right away that the choice of conventional water-based paint is not the best, since it is difficult to lay down on such coatings, and its practical properties are not the best. Washing such walls will not work, and their surface will be rough, and in some cases branded.

Another thing is if the paint for glass wall is acrylic, latex. By and large, this is the same water-based emulsion, but it contains components of acrylic or styrene-butadiene (latex), which improve its quality. It is worth choosing a composition marked "washable", since this is the most practical look paintwork.

Painting glass wall with acrylic or latex paintwork material will allow you to save for a long time appearance and main technical properties wall covering. For example, fiberglass painted with acrylic paint will also remain fireproof, environmentally friendly, resistant to moisture, and also more durable. Through this latex or acrylic paint, the texture of the wallpaper that you like is excellently visible.

Acrylic interior wall paint

At the same time, I would like to note the advantages of paint:

• All colors on water based acrylic and latex, odorless.
• Paint is applied to the glass wallpaper for painting with a roller, spray gun or brush, very easy and simple.
• Absorption and drying speed acrylic composition fast enough, several times faster than other paints.
• During work, you should be careful to get dirty as little as possible, but there is nothing terrible about it, because water-based paints are easily washed off with water. In the case of acrylic, water is relevant until the paint has dried, and then you will have to use solvents.
• The choice of paintwork is very large, in any hardware store you will meet 3-4 worthy brands. Among foreign brands, Tikkurila is known to everyone; among Russian brands, Tex, VGT, Dali can be distinguished.
• The cost of paint and color is low, acceptable for most people.

After coloring composition will be applied to the walls and dry properly, it will look great. Caring for it will not be difficult, since such a coating can always be washed using a sponge, rag and soapy water.

Practical and durable glass wall papers are used everywhere

It should be noted that paint for glass wall papers for painting is consumed to a large extent due to technical features wallpaper, in addition, the first coloring is recommended to be done in two layers. Therefore, it is necessary to budget for at least 500 ml of paint per 1 square meter. Yes, this is quite a lot, but most likely this is how much paint and varnish material will be needed to apply it to the walls.

Experts say that it is possible to reduce the consumption of paint if liquid diluted glue is applied to the cullet as the first layer. This composition allows you to thoroughly impregnate the well-absorbing texture of the fiberglass, after which the paint will lay down well and be spent less.

Color options

One of the most important advantages of glass fiber is the ability to paint them in any color. You can choose from millions of colors, tones, shades. Since the paint is sold in white, you will need to tint it (make the desired color) and here you can go in two different ways:

1. You can tint the paint yourself, using a coloring pigment, a concentrate, specially sold for this purpose. At the same time, you will not be able to have a strong variation with the color, since for the accuracy of the match you will have to dilute the paint cans with a clear amount of color. For example, for a 1-liter can of paint, 1 can of color or for a 7-liter container, 4 tubes of color. The advantage of this method is that you will always know how to mix in additional paint if there is not enough.
2. The second option for tinting paint is computer, which is produced directly in the store. When choosing this method, you are not limited in colors and you can choose any. Experts will tell you exactly how the paint will look on the wall, because after application, it often becomes a tone lighter. However, you should save the tinctures of the apparatus in order to be able to make more coloring composition in the future. desired color, but, unfortunately, this is not always possible, especially when it comes to subtle shades.

Contrasting living room interior

You should choose a color for painting walls based on your preferences, but you should definitely listen to the recommendations of designers:

• For glass wallpapers, it is recommended to choose soft colors, discreet, calm. Such a coloring will be appropriate for all walls, it will not strain and press, and later it can be easily changed to another, repainted in 1-2 layers.
• For people who approach the interior creatively, who need a lively, contrast design, you can suggest making bright inserts on the walls. Against the background of a calm general tone, they will look catchy, attract attention.
• Do not forget about your furniture, which should fit into the overall color concept of the room.

Can add necessary elements into the interior, while the paint for glass wallpaper for painting is also used, but the color scheme is different. If you are creative, you can draw a picture on the wall. Try not to overdo it with the dimensions of the picture, for small spaces should be limited to relevant images.

Wall painting manually

Painting options

We figured out what kind of paint to paint glass wall papers, and now let's look at how to do it. To apply the paint as evenly as possible, it is recommended to use a spray gun, roller and brush for spot finishing. Initial staining is carried out in two layers. The second layer is applied only after the first has completely dried, which means after 12-15 hours, but it is better to wait a day.

Studying the question of how to paint cullet, we found several original ways:

• Wall painting with borders.
• Application of paint and varnish composition on stencils.
• Squeegee, textured wall painting.
• Use in painting azure.

borders

The easiest way to paint using borders can be applied in any room. This design of the walls looks decent in the living room and in the hallway. You can choose different types of glass and divide them with a border, or use the same texture.

The border between the cullet make in the following way: first cut out a strip of the required width, paint the wallpaper, and then paste the prepared border. The divided sections are painted in the same color or different, as desired. In some cases, even contrasting solutions look great, but it all depends on the overall concept of your interior.

Coloring glass fiber with different textures

stencils

Using a stencil, also simple task. Usually they use a ready-made stencil with cut out contours, but if you need to make a large drawing with simple forms, you can take ordinary masking tape and stick it on the wall in the right places.

Glass fiber is dyed before using the stencil, so the paint is applied over the main base. It should be ensured that during staining the paint does not go beyond the stencil. After drying, the stencil or masking tape is removed, and the drawing is finalized if necessary.

Squeegee painting

Squeegee painting of the walls allows you to focus on the unique fabric texture of glass. This type of painting is suitable. First of all, a layer of bright paint is applied, designed to become the main layer. After the base has dried, it is covered with a glazing coating, the color of which is chosen close in tone. As a glazing coating, you can use a translucent varnish. Make sure it's water based.

After drying the top layer, it should be treated with a damp sponge. Thus, you will remove the varnish from the prominent relief parts of the wallpaper, but it will remain inside the texture. High-quality squeegee painting of glass is possible when using a good plastic or rubber spatula.

Applying a base coat of bright paint to glass

Azure

In some cases, to give the interior more color diversity, bright and calm tones are used at the same time, while complementing them with original decorating flakes, which can be colored or white. This is what azure looks like.

It should be applied immediately after the paint has dried on the fiberglass, for which it is convenient to use a flat brush. Brush strokes are performed in the transverse direction, with short movements. After 15-20 minutes, using a rubber spatula, the azure flakes are smoothed out, thus achieving a uniform distribution of decorative elements over the entire surface.

We hope that now you have an idea of ​​​​how to paint glass wall paper with the most different ways. In any case, you can always just paint over an unsuccessful coloring with an additional layer.

Choose quality paintwork for its walls, so that it lasts as long as possible, and looks as good as possible.

Use fiberglass in modern renovation - correct solution especially if they are dyed. You can paint such a surface immediately or after a certain time, there is no significant difference.

Their properties are significantly different from other finishing materials, and when applying paint to them, anyone needs to know which paint for glass wall paper is suitable, which one is better not to use, and how to paint these types of wallpaper.

Choice of colors

Colorless cullets with an interesting texture are great for painting

During repairs, often the masters may have a question about painting the glass. They may not be painted if color solution fits the design of the room, but often manufacturers make wallpaper for painting. Due to this, in their original form, they are sold in gray or white, which do not look visually attractive. If it is decided to change the color of such a finishing material, then you need to know how to paint the cullet.

Water-dispersion paints quickly impregnate the canvas and dry

There are certain criteria for choosing paint that must be followed. This is not about the technology of applying paint to the walls, since there is no significant difference between the painting process. The point is that everyone recommends using only water-dispersion paints. They meet the following parameters:

1. Dry quickly.
2. There is no sharp, specific smell.
3. Quickly get into the structure of glass fiber.
4. Do not contain toxic substances.

Such paints for glass wallpaper are ideal for tinting, and they are made from an aqueous dispersion and a synthetic polymer. When the water evaporates, the wall appears protective layer- a film that appears due to the bonding of parts synthetic polymers. To dilute the paint in this case, not a solvent is used, but ordinary water.

Water dispersion paints can be divided into 3 categories, which are presented in the table:

№	Category	Description
1	Butadiene-styrene dispersion.	High moisture resistance, but after applying the composition, the painted surface will turn yellow due to exposure to ultraviolet radiation. It is best used in a room where the windows face the north side, and little light enters the room itself.
2	polyvinyl acetate blends.	Low cost paint, but low price achieved through certain restrictions. Since they have low water resistance, mixtures can only be used in dry rooms.
3	Acrylic paints.	The most common type for glass. They have high moisture resistance, resistance to sunlight. They dry quickly, and after applying them, the walls can be washed with a wet cloth.

For painting, you can also use water-based paint, latex and acrylate mixture. In any case, it all depends on the desired result. Most paints can be washed after drying, which makes it easier to clean the walls in the future.

If you need to protect the room from fire, you need to knock out fire-resistant acrylic paints. They can also process communications made of metal, for this they serve flame retardants for metal structures.

Popular manufacturers

Finnish paint environmentally friendly

Over the years, certain leaders have appeared on the market that produce paints for glass wall papers. All of them have received high marks and recognition from people. These include:

1. Tikkurila Harmony- quality paint, which dries quickly, and during operation it is consumed very economically. This material has no smell, which means it can be used in children's rooms, bedrooms and other rooms. Matte colors allow you to achieve a velvety effect on the wall, all at an affordable cost.
2. Tikkurila Euro 2 - available with a matte effect based on an acrylic copolymer, which also includes latex. Suitable for rooms where there is no humidity.
3. Mattlatex Dufa is a latex blend with a matte effect. Very durable paints and quite economical to work with.

Color selection

Choose calm pastel colors

Knowing what paint to paint the glass wall paper with, you still need to choose the right color. In principle, it can be anything depending on personal preferences, but designers advise the following:

1. Do not choose very bright colors, as well as catchy colors, because after a while they will bother and annoy. That is why the owners will have to repaint the walls again.
2. For those who love bold design decisions, it is better to pay attention to the inserts of figures. different colors. They are made on the main background, which has a calm color scheme. Thanks to this solution, you can not only update the room, but also make it more spacious.
3. Furniture should be selected according to colors, as well as the texture and patterns on the wallpaper.
4. Using stencils to create patterns, you need to take into account the advice of the masters in your work. Patterns are applied to the walls to expand the space small sizes. If you use large patterns, they will visually reduce the space.

Knowing how the patterns are applied correctly and the walls are painted, you need to proceed to the preparatory work.

To increase adhesion, before painting the surface, it will need to be treated with a primer. A roller is used to evenly apply primer and paint.

How to paint glass wall paper? To do this, the mixture must be applied to the walls in two layers, while the second layer should be applied only when the first layer dries, after about 13 hours. For more information on how to paint the coating, see this video:

Painting glass fiber can be carried out in several variations:

• with borders;
• with stencils;
• squeegee painting;
• using azure.

Knowing all the variations, you can start painting glass wallpaper with your own hands.

Coloring with borders

Use wallpaper of a different texture as borders

With this method, you can revive any room. If you use a stencil for these purposes, then you can paint in two ways:

1. Apply the same texture both at the top and at the bottom of the curb cullet for painting.
2. Use wallpaper different textures in relation to the curb.

After pasting the wallpaper, you can not wait until they dry out, but immediately start creating borders. The procedure is as follows:

1. A strip is marked and cut out on the wall, it should be similar in width to the border.
2. The top and bottom of the wall in relation to the curb is painted in two layers.
3. When both layers are dry, free place decoration in the form of borders is glued.

Coloring with a stencil

The stencil must be glued to the tape

This option is based on the use of stencils in the form of patterns and other geometric shapes. The master needs to select the desired pattern or pattern and transfer it to the wall. Masking tape is used for transfer.

Before performing the procedure, the wallpaper must be painted, after which a stencil is applied to them, and adhesive tape is glued along its contours. Next, the surface is painted and it is important to ensure that the paint does not get under the adhesive tape.

When everything is dry, you need to remove the tape and check the work. If there are irregularities in the lines, then they are drawn. You can also decorate the drawing with additional details.

So that the paint does not flow under the adhesive tape, you do not need to draw a lot of paint on the brush or roller, then it will not flow down the wall and will not fall under the stencil.

For this method two colors of paint are applied. One will be calm shades, and the second catchy. Still used decorations in the form of flakes. This method is used to combine colors.

When the painted area with the main color is dry, you need to use a flat brush and apply azure with it. The movements should be short and the direction transverse. After 20 minutes, the surface is smoothed with a special rubber-based spatula so that the flakes are evenly distributed over the wall. For more information on the use of azure, see this video:

To create a more saturated color, two layers of azure are applied.

The technology is simple and with its help you can achieve the appearance of a fabric texture on the walls. According to the masters, the main layer of paint should be bright and saturated, and when it dries, a glazing coating similar in tone is applied to it.

For this, a translucent water-based varnish can be used, as well as a coating that creates a metallic effect.

After applying the glazing composition, you do not need to wait until it dries, but immediately remove it upper layer and excess paint, using a damp sponge for this. For more information on which color to choose, see this video:

Knowing how to paint glass wallpaper with your own hands and using the described techniques, you can achieve very beautiful walls, which can visually increase or decrease the space and add gloss. Glass wall paint will not only improve the appearance of the room, but also protect the material from moisture, fire and other influences.

The construction market is constantly replenished, which are rapidly gaining popularity. An example of this is such an advanced type of coating as cullet. However, giving them preference when decorating the premises, you should immediately figure out what and how to paint the cullet, which we will do below.

General information

It must be said that given material not so new. In the west, glass wall papers received wide use back in the early 1960s. But, on domestic market they appeared much later, and, at first, they were used only in the decoration of offices, and only after some time they began to “migrate” to apartments.

This coating is made of fiberglass, obtained from special glass briquettes, which are drawn into threads during the heating process.

On the basis of these threads, a woven fabric is made, after which it is impregnated special solution, the composition of which is kept secret by the manufacturers. As a result, the material acquires a stable shape and some other qualities.

It should be noted that this coating is absolutely environmentally friendly. The disadvantages include only the fact that the wallpaper comes in only one color, but for that, they can have different textures.

After pasting the walls with glass wallpaper, the moment comes to cover them with paint or apply a picture to the walls. Therefore, this material is also called wallpaper for painting.

Paint selection

Such priming will improve the adhesion of the coated paint, as well as reduce its consumption. If the wallpaper has stood for some time without painting, then before applying the primer, you should wipe it from dust.

In the photo - applying paint to glass

Painting

After the glue dries, cover the wallpaper water-based paint. To do this, you can use a roller, brush or spray gun. Most often, painting is done with a roller.

So the job looks like this:

• First of all, you need to prepare the paint - stir it well so that the composition is homogeneous, and then add the required amount of color. If you do not know the desired proportion of color and paint, then you can first mix a small amount of the composition, gradually adding dye to it, until the desired shade is obtained. When the proportions are determined, it is necessary to paint the entire contents of the paint bucket.
• Then the coloring composition is poured into a special tray, into which the roller is dipped. To evenly distribute the paint, it must be squeezed out on a relief area in the pallet.
• After that, the paint is applied to the walls from the ceiling to the floor. The coating should be applied in a thin even layer.
• The joints between the wallpaper can be tinted with a brush.
• If necessary, the paint must be applied to the wallpaper again, provided that its previous layer has dried out.