home Attic and roof What is better for the ceiling drywall or plywood. Which is better - OSB or drywall: a comparison of gypsum and particle boards. Where are these finishing materials used?

What is better for the ceiling drywall or plywood. Which is better - OSB or drywall: a comparison of gypsum and particle boards. Where are these finishing materials used?

Is there any alternative to drywall? Of course, this material has excellent technical characteristics, but sometimes there is a desire to finish the room with something else. So how much better would it be to use other materials? This definitely needs to be dealt with.

What can replace drywall?

Mainly use the following materials:

These plates are considered excellent finishing materials. In this case, OSB is an excellent replacement for drywall. This material appeared on the construction market relatively recently. Wherein OSB boards in a short time began to use many people. What is characteristic, with improved technical specifications OSB boards are much cheaper than drywall.
SMG. Magnesite glass boards can also be used as an alternative drywall substitute. They are used to sheathe roofs, ceilings, attics, level the surfaces of walls, make multi-level floors, etc. Although in this case drywall will be cheaper.
Chipboard. Chipboards are needed in order to build internal partitions.
GWP. tongue-and-groove slabs considered much stronger than drywall. They are used to build walls. tongue-and-groove tiles made from gypsum, to which various necessary substances are added. The tongue-and-groove tiles are also divided into hollow and full-bodied. They are distinguished by high strength and excellent sound insulation.

Drywall and plywood: which is better to use

Plywood or drywall? This question comes up all the time. To understand whether plywood can be considered as a substitute for drywall, you need to learn about the advantages and disadvantages of both materials in more detail.

Fire resistance and moisture resistance. In this regard, drywall wins significantly, since plywood does not tolerate moisture and burns easily.
Material price. Plywood is much cheaper than drywall, which is its significant advantage.
Installation of flexible structures. If the design of the room is very complex, then the use of plywood comes to naught. Drywall can be bent as required.
Finishing. Plywood is very difficult to wallpaper or paint over, while drywall can be done easily.
Tools and skills. It is easy to work with drywall, it does not require any additional skills and tools. It won't work with plywood.

It is worth remembering that most often these materials are used absolutely in different areas, so it is difficult to compare them fully. However, at construction forums they will still ask the question “Is it worth exchanging drywall for plywood?”.

tongue-and-groove tiles

Grooved tiles have a number of advantages, due to which many people consider this material drywall is better A.

So this is:

Easy installation. GWP are arranged in such a way that their installation is carried out in a short time.
Excellent thermal insulation. If you have chosen full-bodied HWP, then your apartment will always be warm.
small thickness. PWP is much thinner than drywall, which allows you to apply precious centimeters correctly.

Installation of a partition from tongue-and-groove plates (video instruction)

SMG

Glass-magnesite sheets have the following technical characteristics:

excellent sound insulation
humidity resistance,
high resistance to adverse weather conditions,
light weight,
long service life.

If we talk about the differences between SMG and drywall, then they are as follows:

used for both internal and external work,
withstand high humidity and high temperatures,
ease of installation.

Of course, drywall is much cheaper than SMG. But the scope of its use is rather limited. Therefore, SMG can be used in places where drywall will be useless.

Chipboard

Chipboard panels are most often used as ordinary interior partitions.

The main advantages of this material can be called:

Chipboard is much cheaper than drywall,
Chipboard is easy to install.

But there are also disadvantages:

Chipboard needs to be prepared very carefully for finishing,
Chipboard does not tolerate moisture even more than drywall. Accordingly, this material can only be mounted in very dry rooms.

OSB

Oriented strand board also has a number of its own characteristics. Let's consider them in detail:

Made from natural wood raw material. Because of this, deformation of the plates sometimes occurs.
The material is not flexible. If the plates are thin, then it is still possible to bend them. But with thick plates this can no longer be done.
Complex processing. Processing this material is not as easy as drywall.
Price. It will turn out to be much cheaper to level the walls with drywall than to perform a similar action using an oriented particle boards.

In this case, the advantage of drywall is quite obvious. And the fact that it is cheaper, and its quality is much better, makes it even more competitive.

Sheathing walls with PVC panels (video instruction)

Plywood or drywall - which is better?

Sheathing can be done both with drywall and with plywood. What is better is up to you to decide. Before choosing which material is better to use for work: drywall or plywood, you need to decide what you want.

plywood is more natural material, since in itself it consists of birch veneer and glue, which fastens all layers of plywood together. Exists a large number of varieties of plywood, one more stable and durable, the other more flexible. But in general, the material is quite useful and practical. Plywood can be five-layer, three-layer and simply multi-layer. In general, plywood is used to provide insulation in industries such as: aviation, shipbuilding. In addition, it serves as a material for bushings for bearings.

As for drywall, its materials cannot be called environmentally friendly, because. its surface is a cardboard sheet, and the inside is filled with gypsum dough with various chemical additives.

Features of both types of materials

Also, when determining: drywall or plywood, consider other features of these materials.

The only and main disadvantage plywood is warped due to any type of moisture. Therefore, using this material it is better to check the humidity of the room. Although plywood is well suited for laying floors, as well as for extensive installation.

Drywall, of course, has more advantages: it is resistant to moisture, suitable for building partitions or ceiling sheathing, in addition, it is great for quick installation.

Disputes as to what better plywood or drywall, are underway constantly between builders. Some say that the best drywall material is simply not to be found. It is moisture resistant, difficult to ignite, in addition, profiles can be easily found under it. It is easy to use and quite cheap.

Plywood is being defended by those who fight for environmentally friendly building materials. Plywood may be a bit more expensive than drywall, but it's made from natural materials. In addition, the strength of plywood has not been in doubt for many years, and drywall, in turn, is a rather fragile material in this sense.

In general, which is better: drywall or plywood - it's up to you. Those who are more concerned about the environmental friendliness of their premises and the strength of materials, plywood is suitable, but those who prefer a cheap and easy-to-handle material, drywall is more suitable.

What about your opinion? Who prefers what, preferably with comments and experience of use

Starting any repair, it is often necessary to divide the plane, insulate the walls, level the surface or create elements decorative design as various types cabinets, shelves, ceilings. For these purposes, plywood or drywall is best suited. Before using the product, you need to know the features of working with it, as well as the goals and objectives of the repair. This will help in the choice of material and make the design durable and of high quality.

Existing species drywall

Frame design and installation of GKL sheets

An example of finishing the attic with fire-resistant drywall

A plywood sheet is a product of several layers of glued veneer. The number of layers varies from three or more. This is a two-sided product containing a front and back side.
Basically, similar material is used:

as insulation in the aircraft industry and shipbuilding;
in the manufacture of bushings for bearings;
as a floor covering for laminate, parquet, giving the effect of isolation and leveling.

It looks like 10 mm plywood of the third grade

Plywood can be divided into the following grades:

E (prestigious grade);
I grade;
II grade;
III grade;
IV grade.

Plywood different varieties

Denoting the grades of the material, the manufacturer notes both the front and back base. For example, E/I, I/I, I/II and so on.

Briefly characterizing the I grade of the material, one can note in its composition pin, healthy and falling knots, and there are also small flaws in the wood, up to 5%.

Grade II contains more shortcomings, each next type has even more of them in the raw material.
Today there are the following types of plywood:

The scope of plywood is extensive. It is used:

Drywall

As a novelty, he replaced the popular wood materials.

Storing drywall sheets in a warehouse
In its composition, GKL has unnatural raw materials - cardboard filled with a gypsum layer, which easily absorbs or gives away excess moisture.

The structure of drywall sheets

Names of elements of gypsum sheets

Drywall has the following properties.

Which is better - plywood or drywall: the pros and cons of materials

Wall cladding materials today are presented on construction markets in a wide range. Among them, I especially want to highlight drywall and plywood. Each of them is good in its own way, but often a person planning repairs is faced with a choice. How not to make a mistake and buy desired material at a bargain price?

Distinctive features of plywood

Give a direct answer to the question which is better - plywood or drywall, impossible. Both of these options have their own specifics and scope of use. In order to make a choice, you need to familiarize yourself with the characteristics of both materials.

Particleboard is characterized by increased strength and a variety of types. Not only the thickness of the sheets varies, but also the methods involved in their manufacture. So, plywood can be sanded, laminated, or even low-grade, containing visible defects. All this directly affects its value and properties.

It can be used not only for wall decoration, but also for leveling the floor under decorative coating. In addition, it is also suitable for finishing cladding. Increased wear resistance allows the use given material even in cases where strong pressure will be applied to the surface trimmed with it.

Advantages and disadvantages

Chipboard has a number of undeniable advantages. It should immediately be said about the excellent interaction with dyes. If necessary, the material can be impregnated with a moisture-resistant composition, containing pigments, varnished on top, thereby giving the appearance of noble wood. High environmental friendliness is also an advantage. At chipboard manufacturing only natural components are used, which means that the use for interior cladding of residential premises is safe.

The disadvantages of plywood include its poor interaction with moisture, we are talking about all types of material, except for moisture resistant. In direct contact with water or steam, the sheets glued together begin to spread and curl. That is why chipboard is recommended for use in dry rooms, as well as at relative or moderate humidity. The labor-intensive installation of sheets on uneven surfaces, as well as their high cost, can be attributed to disadvantages.

Characteristics of drywall

Drywall is a fairly fragile material. That is why its use for finishing the floor is impractical. Most often it is used for arranging suspended ceilings and for wall cladding. It has excellent moisture resistance, which allows it to be used in kitchens, bathrooms and toilets, as well as other rooms with high humidity.

The main advantages of drywall are increased moisture resistance and acceptable cost. If we compare this material with plywood, then buying it will be almost twice as profitable. However, it should be remembered that chipboard is much more durable. GKL lends itself perfectly to any kind finishing, whereas with wallpapering on plywood, some difficulties may arise. Drywall can also be painted, plastered, and lined with wallpaper or plastic. Among the disadvantages of GCR, only fragility and brittleness can be distinguished, as well as relatively heavy weight(this should be especially taken into account when facing ceilings).

In other words, if you need reliable material for walls or floors in a dry room that will last a long time, it is better to give preference to plywood. And if you want to clad the ceiling or walls in a room with high humidity, or want to save on repair costs, consider buying drywall.

particle board, fiberboard and drywall sheets– demanded finishing materials interior spaces. Often masters use to install chipboard, gypsum board and fiberboard in the same room at the same time when sheathing is needed various designs. It is important to understand which is better - drywall, fiberboard or chipboard. This article will talk about all the advantages and disadvantages of GKL, chipboard and fiberboard.

Drywall, its advantages and disadvantages

Drywall is now used in almost all finishing work. It is required when creating curly structures, design of window and door slopes, ceilings and walls. With the help of drywall, you can embody all kinds of creative ideas designers.

Advantages of drywall:

Environmental friendliness
Good thermal insulation properties
Ability to hide communications
fire safety
Flexibility and lightness

Disadvantages of GKL:

Brittleness, low strength
Instability to moisture (but moisture resistant drywall exists)

Data-lazy-type="image" data-src="https://remontcap.ru/wp-content/uploads/2017/11/2b-1024x684..png 1024w, https://remontcap.ru/wp- content/uploads/2017/11/2b-300x200..png 1086w" sizes="(max-width: 620px) 100vw, 620px">

Chipboard, its advantages and disadvantages

Chipboard is one of the most popular building materials. Because of its strength, it is used in the manufacture of doors, the installation of partitions between rooms or in the manufacture of various furniture.

Advantages of chipboard:

High strength and rigidity
Ease of processing
Wide range of applications
Stable nails and screws
Homogeneity of the material structure
Ability to manufacture parts of various shapes

Disadvantages of chipboard:

Twice as expensive as a GKL sheet of similar size
Swell with moisture
combustibility
Toxicity (contains formaldehyde resins)

Data-lazy-type="image" data-src="https://remontcap.ru/wp-content/uploads/2017/11/1-1..jpg 640w, https://remontcap.ru/wp- content/uploads/2017/11/1-1-300x199.jpg 300w" sizes="(max-width: 640px) 100vw, 640px">

Fiberboard, its advantages and disadvantages

This material consists of wood fibers, special additives and synthetic polymers. It is made in two ways: either by drying the wood fiber carpet or by hot pressing.

Advantages of fiberboard

Long service life
Water resistance
Low cost
Variety of shapes and sizes
Good heat and sound insulation properties
Easy handling due to low weight

Disadvantages of fiberboard

Sufficiently limited scope of certain types of fiberboard
Some types of fiberboard are toxic because they contain formaldehyde.

Data-lazy-type="image" data-src="https://remontcap.ru/wp-content/uploads/2017/11/e-zVbZ9-..jpg 400w, https://remontcap.ru/wp -content/uploads/2017/11/e-zVbZ9--150x150..jpg 300w "(max-width: 400px) 100vw, 400px">

In what cases should GKL be used for interior decoration, in which - chipboard, in which - fiberboard

Chipboard more often used where strength, rigidity, a strong foundation and solid support for structures are required. They are perfect for the construction of floors, as well as for the manufacture of window sills, doors, shelving. Chipboard is also used to create decorations (niches, facade interiors, etc.), for sheathing partitions between rooms, on which paintings, shelves, etc. are hung.

Drywall excellent for covering surfaces of sufficiently large area, which during operation will not be subject to mechanical stress. It can be used to install suspended ceilings. Pre-primed HAs are well painted and pasted over with wallpaper.

fiberboard is very much in demand today. All kinds of furniture elements are made from this material. Some old furniture and the walls are upholstered with fiberboard. Apart from furniture production Fiberboard is used in construction and decorative work.

Thus, it is impossible to unequivocally answer the question "which is better, chipboard, fiberboard or drywall", since the choice of material will depend on the type of work and construction purposes.

We are building a wooden house. Informational portal