In this article, we will look at a few simple tricks that will help make the process of coloring pictures by numbers even more enjoyable and exciting!

Care behind brushes

For comfortable work with brushes throughout the process of creating your masterpiece, follow these rules:

What Absolutely, Absolutely Not to Do with Brushes:

• Leaving brushes in dirty water (in clean water, by the way, is also not desirable)
• Dry the brush with a hairdryer, iron, steam, etc. (and there were such options too)
• Wash the brush with "Mr. Muscle for the Kitchen" and any similar products

Favorite of all beginners:

• DO NOT mix paints in a jar with brushes. They will "push" and you just won't be able to work with them anymore.
• Peel off dried paint with your nails (pity the manicure)

If for some reason you cannot continue to paint a picture by numbers with brushes from the kit,

dont be upset! You can buy these brushes at any office supply store. The main thing is to choose the right

pile width and continue painting coloring by numbers.

All about paint by numbers paints

First and most important!!!

• As soon as you open the paints and air gets into them, their life shelf life becomes limited and paints start dry. Therefore, we do not recommend starting a painting before vacations, repairs and other long-term events. On average, paints can last from 2 weeks to 2 months after opening.
• When you have just opened the paints, they must be thoroughly mixed. As mentioned earlier, it is best to use a match or a toothpick.

How do you know if the paint is too thick?

Do the simplest test:

• mix the paint with a toothpick / match
• take out the toothpick / match from the can of paint
• did a small drop roll down the toothpick/match? If yes, then the consistency of your paints is excellent and you do not need to dilute anything.

What to do if the paints from the Paint by Numbers set have dried up?

If you are still faced with such a problem, then you have three main options for solving the problem:

slightly thickened , it can be diluted with ordinary water at room temperature. On a jar of paint you need no more than 1-2 drops. After you add water, mix the paint thoroughly and leave for 5-10 minutes. Please note that the jar must be left closed. Only after 10 minutes, if the paints are still thick, you can add another 1-2 drops. The procedure can be repeated many times, the main thing is not to pour a lot of water at once.

If the paint in your paint-by-numbers kit has the consistency of soft plasticine or eraser. The plan of action is as follows: with an ordinary toothpick, you need to make a lot of holes in the paint and pour boiling water and immediately drain the water. You need to repeat this procedure 2-3 times - fill it in and immediately drain it. Next, pour the paint with boiling water, the water should completely cover the surface of the dried paint. DO NOT MIX, leave for 12-16 hours. After the time has elapsed, you need to drain the water, mix the paint with a toothpick by adding drops of boiling water. Do not try to shake the paint sharply, it will come out in lumps. Slowly and smoothly stir in a small amount of boiling water (drop by drop). Also at this stage, any professional thinners for ACRYLIC paints can save your situation. The procedure for restoring paints with professional means should be carried out according to the instructions for this tool.

If the paint is removed from the jar in one piece “Unfortunately, there is nothing that can be done. You can try to use the item above, but there are no guarantees, unfortunately

If the paint in your kit has the consistency of cottage cheese (lumps). In such a paint, you need to add 1-2 drops of hot water, mix well and close the jar tightly. After 12-16 hours, open the jar and check the consistency of the paints. If the desired result is not obtained, the procedure must be repeated. On average, 2-3 procedures are needed for an ideal result. So be patient and you will definitely succeed!

How to keep the paints from drying out if you need to take a break from work?

If, nevertheless, you have not calculated and during work you need to take a long break, then you need to do the following:

• Add a couple of drops of water on top of the paint and NOT stir
• Remove the paints to a cool place (pantry, basement, closet, etc.)
  Such a simple way will help save your colors until the next creative impulse.

We wish you a delightful pastime and really hope that "painting by numbers" will become your new hobby!!!

Acrylic paints for drawing combine the characteristics of watercolor and oil. The main feature of these paints is that the dried image takes on a filmy appearance and becomes protected from exposure to water and sunlight. Using this material is not difficult, given a few important points.

When working with acrylic paints, one of the most burning questions that beginners worry about is what are acrylic paints made of? How to dilute paints by numbers? Can acrylic paints be restored if they are dry? If so, how can they be revived? How to revive acrylic enamel if it is dry? What brush to use? How to paint with acrylic paints on canvas? How to paint water with acrylic paints?

Acrylic paints for drawing combine the characteristics of watercolor and oil

Acrylic paints are most often used for decorative painting and crafts. This material has a covering ability, that is, one dried layer can be applied to another, while the applied pattern or texture is not damaged.

In order to master the skills of painting with acrylic paints, you will need a set of 6 colors and the following recommendations:

1. As a basis for drawing, you can take wood, plastic, glass, paper, cardboard, canvas.
2. In the process of drawing, it is allowed to use synthetic and natural brushes. It is worth considering that with the help of synthetic brushes a thinner layer is applied than natural ones.
3. In the process of working with acrylic, you can use a palette knife. This tool will allow you to apply textured bright strokes.
4. Paints are diluted with water or a special solvent on the palette. The material must be diluted carefully so that it does not become too liquid. To draw with lessers, it is necessary to dilute the material to a watercolor state, and alla-prima can not be diluted. Undiluted paints are applied to the base only with synthetic brushes or a palette knife.

Acrylic paints are most often used for decorative painting and crafts.

How to dilute acrylic paints?

Before diluting the material, you need to decide on the basis for drawing. For painting on walls, you can dilute the material with plain water. For decorating glass, ceramics, furniture, and other wooden bases, it is best to use specialized thinners.

When diluting the material with water, it is necessary to collect only clean and cool liquid. Most often, acrylic is diluted with water in the following proportions: 1:1, 1:2, 1:5. Moreover, the use of each proportion gives the paint special properties:

• 1:1 - used to form the initial layers. This application is due to the fact that the paint becomes more fluid and does not accumulate on the brush;
• 1:2 - used for secondary layers, as the brush is perfectly saturated with pigment and distributes it in an even layer;
• 1:5 - used in glazing technique, since this composition allows the pigment to penetrate into the pores and form a translucent layer. It is impossible to achieve such an effect if the pigment is diluted with a special solution.

To obtain a gradient, the pigment is diluted with water in a ratio of 1:15.

What to do if acrylic paints are dry?

Acrylic can be used for painting even after drying. But in order to return their consistency, you need to know a few tricks. It is worth considering that it will not work to dissolve the dried paint with cold or warm water, since this material acquires a film structure and is not subject to destruction under the influence of low temperatures. Therefore, if the paints are dry, boiling water is used to dilute them. The return of the pigment to a liquid consistency is carried out according to the following instructions:

1. The dried piece is crushed and transferred to a bowl.
2. Then the mass is poured with boiling water.
3. As the liquid cools, it should be updated.
4. After all the crushed parts are saturated with water, the paint will be suitable for drawing again.

It is worth considering that most experienced craftsmen do not dilute dried acrylic, as its properties will be somewhat different from fresh paints. For example, the main disadvantage of pigments diluted in this way is their heterogeneity, due to the fact that some lumps did not dissolve in boiling water.

How to draw with acrylics (video)

Acrylic paints for plastic and glass - is there a difference?

Most manufacturers produce various types of acrylic, among which you can find material for painting glass and plastic. Acrylic for glass is designed specifically taking into account the characteristics of the material. Most often, such a material is distinguished by a glossy sheen, translucency of the pigment. Such features allow you to create a sparkling painting on a glass surface, imitating stained glass windows.

Most manufacturers produce various types of acrylic, among which you can find material for painting glass and plastic.

The use of acrylic for plastic for glass processing is possible, but this material will not be able to maximize the elegance of light overflows in the product. Acrylic for painting on plastic surfaces and canvases has a rich opaque color that allows you to overlap the color of the previous layer. With the help of this feature of the material, you can create the most beautiful crafts, making plastic more elegant by forming a layered texture on its surface.

The composition of acrylic paints

Acrylic is made from acrylic resins. They are polymers that, when dried, form a structure that retains the pigments that are part of the paints as an additional component. Acrylic pigments can be inorganic, natural or synthetic. Most often they are a dry powder that fills the base with color and makes it less transparent.

Acrylic is made from acrylic resins.

The resulting film after drying is formed due to the presence of polyacrylates and polymethacryls in the paint composition. In addition to these components, fillers are also added to acrylic - large pigment particles, a binder necessary for gluing solid particles.

The best acrylic paints for painting

There are many manufacturers who make acrylic paints for painting. However, not all acrylic products are of high quality and reliability. For example, some manufacturers use low-quality raw materials in order to reduce the cost of their products. And such a move, in turn, affects the quality of the colorful material, for example, after drying, many of them begin to crack or lose their brightness. To avoid such problems, it is necessary to give preference to trusted manufacturers, the best of them are presented below:

1. Acrylic color - produces products in tubes. The consistency of the material is quite liquid, therefore, in most cases, dilution with water is not required. This material does not allow the use of a palette knife for drawing.
2. Gamma is a medium-priced acrylic suitable for beginners to paint. The consistency of the pigment is quite thick, so it can be further diluted with water or thinner. Allows you to draw both with a palette knife and a brush.
3. Nevskaya Palitra and Ladoga - acrylic, improved quality. It is used for drawing by professionals, students of art schools and universities. They form a beautiful texture of strokes, and also retain their color qualities and structural features.

Step by step acrylic painting: lesson (video)

"Anyone can become an artist!" - Today this motto is more relevant than ever. Yes, yes, do not be surprised, in our time, anyone can feel like an inventive Leonardo da Vinci or an expressive Van Gogh. After all, it used to be that in order to paint your canvas, you had to study at an art school for years or, at least, finish expensive drawing courses. And everyone, regardless of gender and age, can create their own still life, portrait or landscape in just 3-5 days - just like a real master exhibiting in famous galleries.

What is the reason for this phenomenon? In paintings by numbers, which are gaining more and more popularity in the 21st century. After all, they allow to reveal the creative potential of everyone who craves it, even if they do not have enough experience or free time.

Drawing on the principle of "all inclusive"

Best of all, any home painting kit already comes with everything you need: numbered paint jars, one or more brushes, instructions, a checklist for checking shades, divided into sectors and marked with numbers cardboard or canvas with a stretcher, varnish mixture and wall fasteners for the finished painting. You can start creating right away! But first, you should choose the desired basis for the picture and get acquainted with life hacks for coloring.

Cardboard vs canvas

Experienced painters by numbers believe that it is worth starting with. After all, this material is very cheap, but at the same time it is able to absorb excess paint applied to it, which is important for beginner artists. But the cardboard does not give the paintings the texture and “realness” that the canvas gives: a little rough to the touch, already primed and stretched on a real stretcher (). Canvas, in turn, is available with a monochrome numbered outline or color. The last type of canvas is suitable even for the elderly and visually impaired, as well as children, because. coloring becomes intuitive. It is better to start with small formats and understandable subjects: animals, fish, birds, landscapes, nature or flowers. But it is worth moving on to drawing people, angels, icons or complex architectural structures after mastering the basic techniques of number painting.

With or without rules?

Of course, contemporary art no longer has clear “do's and don'ts” instructions, and the rules of contemporary art exist solely to be broken. But for this you need to know at least a little, and therefore, before you start unpacking the treasured box with canvas and paints, you should study the Internet encyclopedias in order to learn or refresh the concepts of light and shadow, line and shading, perspective and plane, front and background, color separation and contrast…

And if you are still a beginner and do not have experience in creating paintings by numbers, then it is better to follow the instructions that are in each set exactly. And when you master the basic techniques of this kind of painting, you can already work out the baggage of your techniques and chips. Moreover, there are not so many basic techniques that greatly facilitate drawing.

"Magnificent Four" methods of coloring pictures by numbers

There are 4 principles of canvas painting. You will memorize them without difficulty, because they are unusually logical and functional, they are already prompted by common sense and convenience to anyone who paints.

From light to dark

By painting over white, yellow, blue or pink areas at the very beginning, you will avoid accidental blots. After all, it is much easier to erase or block a pastel shade with another color than a bright or dark color.

If you paint at the very beginning all the large details of the picture, then you will not only avoid the blunders and blots mentioned above, but you can then correctly place the nuances and draw small details, put the right strokes and highlights. So it will be easier to compare the “small things” with the main semantic spots of the picture: agree that by painting over the vase and the three largest buds in it, it will be easier for you to place medium-sized flowers and leaves of the bouquet next to it.

Moving in this direction, you definitely won’t smear the pattern already applied on the edge with your shirt sleeve or elbow. As a rule, it is in the middle of the picture that classical artists have the main image, whether it is a hut in a pastoral landscape or a vase of fruit in an appetizing still life.

This way of moving across the canvas also allows you not to rub off the already applied paints with your elbows, they will dry out during the application, and when you get to the bottom edge, the top of the painting will be almost dry.

How to hold a brush and make strokes?

The brush is easiest and most comfortable to hold in the same way as you hold a ballpoint pen. Your hand must be supported. This is enough so that you do not get tired, and the picture is neat. To begin with, it’s worth mastering the usual strokes: just try to paint over each numbered fragment as evenly as possible, making smooth movements with a brush from left to right (if you are right-handed), putting paint in an even layer of the same thickness, without going beyond the outline.

Once you get the hang of it, you can experiment with layer thickness, hatching, and even dot painting if your artistic intent requires it. For example, if you need to draw a heavy and water-saturated rain cloud. After all, its lower part is rough and dark, which is well conveyed by small ripples of dots, and rain threads descend below, which are easiest to imitate with short oblique strokes.

Bright mix: how to mix paints correctly?

As a rule, paints are already mixed in a set, which is why there are so many numbers in it, because each of them means a certain shade, which sometimes differs only by a fraction of a tone from the previous one. If in the process of drawing you run out of the desired color, it is quite possible to mix it yourself from existing paints. Usually light tones end first of all, because there are usually more light spots in the picture than dark ones, and therefore it is enough for you to slightly dilute with white the tone that is closest in shade to the one you need. It is best to do this on a palette or a sheet of cardboard, and not directly in a jar, so as not to accidentally spoil the entire mass of paint.

Effective and Effective: Blurring the Boundaries

It's amazing, but with just two tricks - creating clear or blurry borders - you can give the picture depth, expressiveness, and a professional look. To understand in which area it is worth making the most clear contour, and where to slightly blur the edges, it is enough to carefully consider these places on the sample reproduction.

This is glitter: 3 unique types of varnish

When the picture is ready, you will probably want to give it a gloss and keep it from dust, cracking and fading by covering it with a transparent protective base.

Matte acrylic varnish is good because it dries unusually quickly, and also gives the colors extra brightness. Literally in a couple of 6-8 hours after covering the painting, you can proudly hang it on the wall and invite relatives and friends to your own vernissage.

Gloss, as the name implies, gives the image a special shine and smoothness. This is a plus if you want to smooth out some roughness, but a minus if you want to emphasize volume. The aforementioned matte does better with giving texture.

Craquelure truly magical: it allows you to nobly age a completely new picture in moments, covering the surface with a network of bizarre cobweb cracks, turning a newly created portrait or landscape into an elegant antique.

Auxiliary materials

Before starting work, you should cover the table with newspaper or film, install bright, but not eye-catching lighting, and also stock up with toothpicks and cotton swabs. The former will help to draw even the thinnest lines, while the latter will be useful in order to remove excess paint in time or correct an unsuccessful stroke. In addition, you may also need a set of brushes of the best quality and different diameters, a palette and even an easel if you are going to paint in nature or in the country.

Do not forget to put a jar of water on the table and put disposable napkins. But do not rush to immediately open all the cans of paint: acrylic quickly thickens, so open them in stages, number by number.

Frame for a man-made masterpiece: choosing the perfect frame

Acrylic perfectly imitates classic oil paint, and therefore it is worthwhile to decorate the finished picture with dignity. A textured, slightly deepened and gilded or silver-plated frame in the Baroque style will suit almost any plot: with fine ligature, vignettes or vines. After all, then the image will acquire the proper volume and become a worthy decoration of your home art gallery! ()

The most popular on the market are acrylic paints, which are widely used in various areas of construction. However, for people who use such a composition for the first time, the first question that arises is how to dilute acrylic paint?

The abundance of advantages, in comparison with other materials, made them the most popular. In the manufacture of synthetic substances are used, giving high performance. The material is a composition based on acrylic acid.

Peculiarities

Acrylic paints include three elements:

• color pigment;
• binder (most often resin);
• water.

This composition ensures the environmental friendliness of the material. During work, the paint does not emit toxic fumes and odors. The presence of water makes the paint non-flammable. These qualities ensure the safety of using the material in office and residential premises.

If necessary, obtain the desired shade can be diluted with a coloring pigment. The presence of water allows the material to dry quickly. In case of drying, the material can be easily returned to its original state by diluting with water.

Obtaining the required density

All acrylic formulations are sold as a thick mixture that almost always needs to be diluted. This is done not only for the convenience of work, but also to obtain a smooth surface after drying.

For dilution, you can use:

1. Water based solution. Since water is one of the elements of this material, its addition may well help to dilute the composition. However, dried acrylic paint cannot be washed off, so immediately after work it is necessary to clean the tools. Otherwise, their further use will be impossible.
2. Special means. There are many special liquids designed to achieve the desired consistency. They are recommended by manufacturers.
3. Solvents. Acrylic paints, like enamels and other materials, can be mixed with common solvents, although they may affect the final properties. Unlike water-based paints, some solvents can give a glossy finish, while others can make it matte.
4. Other paints. for new colors and shades.

If you choose how to dilute the material, it is better to focus on the required performance.

How to breed

Unlike enamels, acrylic paints are much easier to prepare. However, if you use them, you need to follow the rules to get the required density.

First, decide on the subject of painting and determine on what basis the solution will be prepared.

If these are building walls or ceilings, it is enough to use water as a solvent. For furniture and other wooden structures, it is better to use special tools with a certain property.

They can be found in hardware stores. If you are using the material to coat metal surfaces, you should use conventional solvents.

In case of using water, it is extremely important to use only clean and cold water. Acrylic compounds are more whimsical than enamels. You can make several experiments with small proportions to obtain the desired consistency. Most often, the proportions are 1/1, 1/2 or 1/5. Each ratio has certain properties:

• a ratio of 1/1 is used for the initial layers, since the paint is less greasy and does not accumulate lumps on the brush;
• 1/2 is used for secondary stains, in which the brush is well saturated, and thin even layers are obtained;
• 1/5 allows you to penetrate into fine pores and get a transparent layer, great for designs with a textured surface.

If you want to make a gradient of tones, you should make a ratio of 1/15. This is almost pure water, in which a slight color tint is added. Applying several layers of this composition will allow you to achieve a transition from dull to saturated color. It will not be possible to achieve such a result on the basis of a solvent, since the liquid will corrode a small amount of paint in the composition.

What to do with dried paint

Unlike enamels, acrylic paints can be used even after drying. When the composition stands for a long time after opening the lid, it inevitably undergoes drying. This is typical not only for enamels, but also for other materials based on synthetic substances. However, acrylic paints can be diluted. True, their properties will differ from the previous ones.

Since the composition is based on water, its addition will return the characteristic features. First you need to carefully crush the dried piece and put it in a container that can withstand the temperature of boiling water. Then boiling water is poured into the vessel. The procedure is repeated as the liquid cools. When all the particles have absorbed enough liquid, the process is over.

In the modern world of advanced technologies, the comprehensive flourishing of chemistry, physics and related industries, various dyes with various purposes are firmly rooted in people's lives. Colorful shades are now attached not only to festive paraphernalia, bright colors can be found everywhere. In technology, fashion, design, flashy ultratones are increasingly used. Acrylic paint, due to its properties, is increasingly used not only by advertising artists, but also by masters of various directions.

Varieties of acrylic dyes and their areas of application

Organic compounds have been known to mankind for quite a long time. Some of them are used in their original form, others are being replaced by newer and safer substances. Acrylic paint has practically replaced its predecessor, oil paint, from the sphere of construction and design due to its exceptional properties. A polymeric water-soluble quick-drying dye without a pungent odor is used not only in painting, but also in external and internal finishing works.

In turn, high art has long since spread beyond the stuffy studios of unknown artists. Fearless master painters have come out and apply their talents in various fields. Artistic painting these days can be seen not only on canvases or kitchen utensils. Phantasmagoric ornaments, heroes and stories, executed by talented hands, are found in clothes, manicure, on the walls of houses and apartments, drawings adorn the shiny sides of brand new cars and designer furniture.

Everyone is their own master

Development has affected not only science directly, but also people in general. There are more and more talented people who do not want to trust the creation of masterpieces to others.

Parents paint the walls of children's rooms with their kids, desperate car enthusiasts draw bizarre shapes on the metal parts of their pets, well-groomed young ladies with enviable persistence practice in applying ornaments to flawless nails, young rebels, followers of Picasso and Dali, stealthily decorate gray fences and walls of abandoned houses on dark nights. buildings with magnificent works of street art.

Surely in almost every home there is acrylic paint, stored up for certain needs. Sometimes it is forgotten due to a bad experience of application or simply as unnecessary. But at any moment, an artist who has long fallen asleep in the bowels of the soul can revive. Therefore, every artist needs to know how to apply leftovers or how to dilute acrylic paint if it has dried up in order to continue creating.

Acrylic paint for drawing

In the middle of the last century, the mass production of acrylic paints began, and the first to use them were artists.

Among the most eminent masters, one can mention Frank Stella, an American painter who became a pioneer in the use of a new coloring matter; Leonard Rozoman - an English artist whose work is full of realism; Paulo Rego, her works have become the standard of modern symbolism.

Many of today's fine arts professionals use acrylic. For painting, a thick consistency dye is used, which dries fairly quickly. If it becomes necessary to revive old stocks, you need to know how to dilute acrylic paint. Ordinary water is quite suitable for drawing, since the dye is made on its basis. When applying an image to a waterproof surface, you can use an ordinary household sprayer to moisten it. However, in some cases, special solvents are required that change the properties of the paint. To choose the right one, you should follow the recommendations of the acrylic gouache manufacturer.

Acrylic wall paint

For interior finishing work, more liquid acrylic is used. This property of the paint allows it to be applied evenly over the entire work surface. Despite the consistency, the once-liquid substance may eventually lose its original moisture level and thicken. How to dilute acrylic wall paint? Again, water. Moreover, acrylic-based dyes for finishing work can be diluted to transparency. This allows not only to save money, but also to achieve the necessary smoothness of the surface.

Before some unlucky masters, the question arises: how to dilute acrylic paint if it is completely dry? And in this option, water, or rather boiling water, is suitable. In order to recreate the previous consistency of the paint, it must be crushed. After that, pour boiling water over it, wait a bit until the water cools down, drain, then repeat the procedure. After a few minutes, it will acquire its former properties.

Acrylic paint for textiles

With the help of a popular polymer dye, you can not only paint on canvas. It is also suitable for decorating clothes. Due to the exceptional properties of acrylic paints (after drying, they acquire water-repellent properties), the patterns on clothes remain for a long time even after many washes in automatic machines at temperatures up to 60 degrees Celsius. This has long been and quite successfully used by many large and not so manufacturers and designers of fashion products.

Experienced users claim that the miraculous polymer can be diluted with anything. Acrylic paint for fabric is usually marked with an appropriate inscription; this type of dye is more resistant to external influences and often does not have time to lose its properties. If she needs dilution, then water to the rescue. Drawings on textiles are recommended to dry well and process with a hot iron. This will allow them to last longer.

Acrylic paint for manicure

Contrary to the modest hopes of developers of dyes based on acrylic resin, the invention became extremely popular. Today, its use is almost universal. Acrylic is not only used to paint pictures, fashionistas are very passionate about them: they decorate clothes, accessories, nails and even bodies.

In manicure, almost the same substance is used as in painting. If the question arose of how to dilute, acrylic nail paint, as well as for almost all other surfaces, can be diluted with water to obtain the desired consistency and use in a certain application technique.

It is important not to confuse paint with acrylic varnish. It requires a special thinner, which can be purchased from a supermarket or specialty store. The differences between varnish and paint are that the first is intended for uniform application of the same color over the entire area of ​​​​the nail plate, and the second, in turn, serves for the detailed application of miniature artistic elements, after which it is already covered with additional varnish or gel.

Acrylic paint for car

Despite the apparent ease of use of acrylic paints in art, design and fashion, it is worth mentioning car enamels, which are based on the same component, but their use is a more time-consuming and complex process. Any part of the car must be durable and resistant to all climatic manifestations. The same applies to appearance. Therefore, acrylic car enamels always consist of two components - the paint itself and a hardener, which, as a result of a chemical reaction and drying, are in no way inferior in quality and durability to their counterparts based on alkyd resin.

Unfortunately, it will not be possible to dilute acrylic paint for cars after hardening precisely because of the additional component. It must be used immediately after mixing. Despite this, acrylic car enamels are the most popular precisely because of their ease of use and quick drying.

How to dissolve acrylic?

The question of how to dilute acrylic paint is not always the most pressing. Often there is a need to remove it from the surface, that is, to remove it. In this case, a suitable solvent is needed. Since acrylic paint becomes resistant to moisture and mechanical stress after drying, removing unwanted particles can be a problem. One of the ways has been described above. If the surface of the material allows treatment with boiling water, then it is worth using it.

From painted walls and other flat and dense surfaces, the paint can be scraped off mechanically. All you need is the right tool for this. In other cases, based on the properties of the painted surface, the quality and purpose of the acrylic dye and additional components, you need to use a suitable solvent. The most acceptable and affordable is alcohol. In any case, it is worth consulting with a representative of the paint manufacturer in order not to completely spoil the thing.