home from a log Make your own tree of happiness. Do-it-yourself tree from tree branches: ideas, diagram, instructions. Ball of fresh flowers

Make your own tree of happiness. Do-it-yourself tree from tree branches: ideas, diagram, instructions. Ball of fresh flowers

Decorative trees made of artificial materials are ideal for decorating your home or office. They will perfectly fit into the design of any interior, creating a cozy atmosphere in the room. Such hand-made crafts do not require special conditions of maintenance and careful care compared to living plants. From this article you will learn how to make artificial trees with your own hands in different ways.

artificial pistachio tree

You will need:

Gypsum;
Pot;
Pistachio shell;
Spray paint gold;
Wire.

How to make a tree with your own hands from pistachio shells:

Using a drill, make a small hole in each shell;
We cut the wire into segments 15-20 cm long and fix one shell for each of the segments. Next, we twist the wires and get blanks;

We connect several leaves together by twisting the wire. Thus, a branch is obtained;
We make several branches and twist them together - we get the trunk of a tree;

We wrap the branches and the stem part with FUM tape. Instead, you can take a thread or rope;
Let's paint the craft;

Let's prepare the base: we will prepare a pot suitable for crafts, which we will fill with plaster and insert our “golden” masterpiece into it;
Let's wait until the plaster dries. We paint the pot with paint;

Additionally, we make out the finished craft with coins.

Similar ideas for hand-made crafts can be found in the article.

Master class on making decorative poplar

Such a beautiful "poplar" is a great decoration for a house or street.

Required materials:

Candle;
Glue;
Needle;
Matches;
Thin and thick wire;
Pot;
Gypsum or cement;
Gray and green threads;
Green plastic bottle;
Scissors.

Step by step master class with photo:

We separate with wire cutters from a thick wire 3 segments that are identical to each other, connect to each other by twisting. We wrap the ends of the blanks on one side;
We dilute the fixing mixture, pour the solution into the pot, put the “poplar” trunk with curved ends there. We are waiting for the mass to solidify, and at this time we are making artificial branches;
We cut squares of different sizes from the bottle, cut out the leaves from them. We heat a needle over the flame, make holes in the upper part;

Insert a thin wire into them, fold in half, twist. We combine three branches into one and make several identical blanks;
Next, for the manufacture of crafts for the home interior, we take several blanks, which consist of three branches, and connect them together;

We close the wire part with the help of gray threads, fix the ends with glue. We leave the lower part of the branch free, which we attach to the trunk;
Using the same method, we make the entire “poplar”, we wrap its stem part with a gray thread;
To imitate grass, cut green threads of the same size, fold them in half. Lubricate the bending points with glue, fasten the blanks to a cement or gypsum base.

Thus, we get beautiful artificial trees in pots that can safely stand both at home and on the street - they are not afraid of rain and bright sunlight.

artificial home apple tree

It is advisable to place such decorative artificial trees only indoors, because their flowers are made of yarn.

You will need:

Glue;
wire cutters;
Cardboard;
Hook;
Scotch;
Wire;
Pencil;
cement or plaster;
Scissors;
Brown and green fabric;
Pot;
Red and brown threads.

Stages of work:

We cut off with wire cutters six wire blanks of 30 cm each, five - 25 cm each, and twenty-two - 4 cm each;
We attach with tape to a large wire branch 3 small ones. Let's make some preparations. Branches can be wrapped with matter, for example, velvet or fleece;

We cut strips 2 cm wide from brown fabric. We wrap them with blanks of branches (several pieces), leaving 3 cm free at the bottom. We fix the ends of the matter with glue;
We collect the blanks into a single "apple tree". We cut off a strip of 3 cm from the fabric, wrap it around the canvas and the branches connected to each other. We also fix the fabric ends with glue;

To make a decorative apple tree further, we install it in a container with a narrow neck. If such dishes could not be found, then in order to fix the “plant”, we pour cement or gypsum mortar into the container. We straighten the branches and begin to decorate our craft;
Now we will cut leaves of different sizes from green matter, and singe their edges over the flame, not bringing them very close to it so that they do not spread;

We glue the leaves on the branches and begin to create fruits that are made from. Cut out 2 circles from cardboard, 3 cm in diameter. We draw a smaller circle inside and cut it out, we get 2 cardboard rings;
We connect them into a single part, we wind a red thread on it with a hook. The yarn should completely “hide” the workpiece. We cut it from the outer edge, lay a brown thread and use it to tighten the resulting pompom;

Cut out leaves from green material, glue on a brown thread;
We hang ready-made "fruits" on the branches. You can also decorate the pot as you wish.

Volumetric tree on the wall

This unique 3D decoration can be made by hand on the wall (and even on part of the ceiling) without any problems. To get a real masterpiece, it is not necessary to have the knowledge of a sculptor or artist.

Important: This decor requires a lot of space.

You will need:

Master OK;
Bucket;
Marker and scissors;
Acrylic paints and brushes;
Scotch;
A bag of dry gypsum;
Large sheet of cellophane film.

Progress:

Let's draw a contour mirror image on a cellophane film with a marker, and when we cut out the traced middle, we should get a stencil;
We stick it on the wall with adhesive tape;
Pour water into a bucket and dilute gypsum;
Carefully fill in the empty stencil space with the help of a trowel;
Remove the film after the mixture has dried;
We apply a few more gypsum layers, the last one is rounded;
When the solution dries well, paint the sculptural image with acrylic-based paints.

You can choose from a variety of palettes. In the living room, a “natural” image will look great, in a children's room on the wall - a fabulous tree, unusually painted.

decorative tree from branches

To decorate the interior of your home, you can make large artificial trees with flowers.

Necessary materials:

Glue hot gun;
Twigs;
Sea pebbles;
Square flowerpot;
Decorative flowers (you can - paper);
A piece of foam.

How to make a decorative tree yourself from ordinary branches:

We fill the bottom of the flowerpot with sea pebbles and put foam plastic on them, and insert the prepared branch into it;
We sprinkle it again with sea stones for good stability, insert moss on top;
Now we decorate the branch. To do this, glue the decorative flowers randomly to the branch with a glue gun;
After the end of this procedure, such a decorative craft will rightfully serve as a decoration for your house or apartment.

On the Internet, you can find many photos of trees made by yourself, choose the option that suits you and create your own masterpiece based on it. For another interesting idea for creating an artificial tree, see the video below.

Video: How to make a do-it-yourself LED tree

Artificial trees can be considered an excellent decor element for any room. They remain ever-blooming and decorate the house. They can be used as a gift. Decorative trees with your own hands can be made in any variation. However, before starting work, you should decide which type of tree you will need to use as a basis.

Making an ever flowering tree

To carry out the work, it will be necessary to prepare superglue, corrugated paper, PVA glue, and a knitting needle. The master will also need any object that resembles a trunk. It is important to prepare a pot. Stock up on plaster before starting work. To make decorative trees with your own hands, you need to take corrugated paper and make several strips out of it. The size of the flowers will depend on the width of these blanks, in this case this parameter varies from 1 to 2 cm. If corrugated paper is not available, it can be replaced with napkins or tissue paper.

flower making

First you need to cut the green squares that will form the basis of the leaves. Squares should have a side equal to 4 centimeters. Then you can start making flowers, you need to fold the paper one by one, while adding glue. You can fold each strip at an angle of 90 degrees, but it is acceptable to experiment, as a different angle of bend of the strip will affect the shape of the flower. For this, an ordinary stick and a ball are suitable. The latter must be fixed on a stick using superglue or adhesive tape.

Ball Assembly

Then, using PVA glue, roses can be attached to the ball. If you yourself decide to make decorative trees with your own hands, the master class presented in the article will help you. When all the flowers are fixed, you can add leaves, strengthening them in any order. Now you need to "plant" a tree. For this, a pot must be used, which can be replaced with a cup. The entire space must be filled with gypsum, which is diluted with water until the mixture becomes thick. Now the structure can be seated in a pot, it is preferable to install everything against the wall so that it is possible to support the structure. In this state, the tree must be left until the gypsum solidifies. After the plaster must be closed with green fiber or painted with acrylic paint. By making decorative trees with your own hands, you can decorate them as you wish. To do this, you can use satin ribbons.

Making a tree from fabric flowers

This tree is very easy to make and requires some fabric, a bamboo stick, a pot, buttons and ribbons, and chalk. A needle will come in handy, as well as thread and scissors. Take care of the presence of a floral sponge, as well as a synthetic winterizer. You will need to cut out circles from the fabric, which are most easily drawn using a mug. Next, the circles are stuffed with padding polyester and sewn together.

Barrel manufacturing and assembly

Now comes the turn of the bamboo stick, which must be wrapped with green tape. When you make decorative trees with your own hands, the next step is to insert a floral sponge into the pot, and install a stick in it. Next, using glue, you need to fix the moss, and then glue the flower to the stick. If you wish, you can also decorate the pot with a ribbon, and then add a button.

Making a coffee tree

To carry out the work, you need to prepare a ball, PVA glue, threads, superglue, a pot and a stick for the barrel, as well as tape, gypsum and coffee beans. Initially, you will need to prepare a foam ball. It must be wrapped with threads and the grains must be fixed to the surface of the workpiece, and glue should be used. It is initially recommended to wrap the spherical element with threads, the ends of which can be attached with glue. Next, you should designate the place where the trunk will be installed. It is necessary to leave a small circle, the diameter of which is 1 cm, threads and grains will be glued there. If you decide to make a decorative tree with your own hands, then the next step is to start gluing the grains. For this, it is preferable to use PVA glue, since superglue can corrode the foam.

It is preferable to apply glue to small areas, each of which should be covered with grains. Thus, it will be necessary to act until the entire surface is pasted over. It is not necessary to press the elements strongly. It is better to let the structure dry after pasting half of the ball, which will take about half an hour, only after that you can continue. After the first layer is glued and the composition dries, you can proceed to the second layer. This time you can use superglue, the grains should be facing the convex side down. It is better to strengthen them in those places where gaps are visible. It is not necessary to coat each element with glue, you can squeeze the composition onto a newspaper, and then dip the grains into it.

Now the whole structure must be left to dry completely. When a decorative tree is made with your own hands, at the final stage you need to leave gaps for the trunk, which are then sealed with grains. Next, a pot is prepared, in this case it is preferable to use one that is made of glass. In order for the tree to hold well, you must also use gypsum. You can add some coffee grounds to it during preparation, so you will achieve a brown color. When the plaster is poured, you need to install a tree in it and lean it against the wall. In this state, the tree should remain overnight. From above, you can fill everything with hazelnuts. It is permissible to decorate the trunk at will, quite often a satin ribbon is used for this.

Another option for making wood

Before you make decorative trees with your own hands, you need to familiarize yourself with the technology of the work. In this case, you will need foam, yarn, wire, green coffee, pliers, masking tape, a pot or other utensils. As in the previous case, the pot will need to be filled with plaster. But first, a foam ball is being prepared, which you can make yourself, and then wrap it with thick threads. You will need several such balls, in this example we will consider the option in which there are six of them.

Then you can proceed to the manufacture of the base, in this case it is recommended to use not a wire, but an electric aluminum wire, which has 3 cores at the base. The lower part of the tree will consist of three veins, while, rising higher, the trunk will have several branches and individual knots. If you are thinking about how to make a decorative tree with your own hands, then the next step is to bend the wire, as required by fantasy. This will get separate branches. You can secure them together with masking tape. Pliers will allow you to cut the wire, but the braid can be removed as far as you want to fit the foam balls. In order for the trunk to be as soft as possible, you need to apply masking tape by wrapping the element around it. In order to fix it better, you can use glue.

Now you can put the previously obtained balls on the frame. Pour gypsum into the pot and install a tree in it. When the plaster hardens, you can decorate the tree as desired. Now you can stick the second layer of coffee beans. When making decorative trees for the house with your own hands, you can slightly change the design, using the technology that you develop yourself as the basis for the work.

Finally

Trees made according to the method described above can be made in different modifications. For example, if you do not use the barrel, but only the balls themselves with grains glued to them, then these elements can be strengthened on the surface of the canvas. The latter can be made a real picture. In order to make a decorative tree on the wall with your own hands, you will need to prepare a plywood canvas. After the design should be framed.

It can be called an excellent element of decor for any room.

Making an ever flowering tree

If you decide to make a tree with your own hands from tree branches, then you can take a blooming composition as a basis. In addition to the main named element, you will need a knitting needle, plaster, corrugated paper, super glue, a pot, as well as an object whose shape resembles a sphere. The knitting needle is useful for winding flowers.

Work technology

If you decide to do it, then first you need to prepare corrugated paper, from which several strips are made. Their width will determine the sizes of the flowers. The article considers an example that involves the use of strips of different widths. In this case, it varies from 1 to 2 cm. Instead of white corrugated paper, you can use papyrus or ordinary table napkins. First you need to cut blanks for the manufacture of leaves, which will initially have the shape of a square. Each element will have sides equal to 4 centimeters. At the next stage, you can start making flowers. It is recommended to add some glue after each crease, which will strengthen the flower. This is especially required for the central part.

When making a tree with your own hands from tree branches, you can bend each strip 90 degrees, however, if you wish, you can experiment, a different bend angle will determine your flower shape. This indicates that the process can produce flowers of not only different shapes, but also sizes.

Making the base

When a tree is made with your own hands from tree branches, the flowers obtained at the previous stage can be fixed on the branches with glue, decorating everything with prepared petals. As an alternative solution, roses can be fixed on a ball. It, in turn, can be glued to a natural branch. The ball can be made from ordinary threads twisted into a ball. After the ball can be fixed on the branch, which can be done with super glue and tape, you can begin to strengthen the roses to the ball. Once all the elements are strengthened, you can add a number of leaves that are strengthened in random order. Now the tree needs to be planted in a pot, which is often replaced with an old cup. Lastly, you need to fill in the gypsum, and then dilute everything with water.

It is important to achieve the density of the composition. At the next stage, the resulting tree can be planted in the prepared mixture. It is better to put the entire structure against the wall to provide support. It is important to exclude the fall of the tree until the gypsum dries. Before you make a tree with your own hands, you can think about how you close the hardened gypsum. It may be a green fiber. Another solution involves the use of acrylic paint, with which the surface is decorated. You can decorate branches with thin ribbons of any color, but those that have a green tint will look most harmonious.

Making a fabric flower tree

If you are thinking about how to make a tree with your own hands, then you can use several other materials, including fabric. Branches are still the main components. Among other things, it is necessary to prepare a bamboo stick, the height of which is 20 cm, as well as a pot, some fabric, chalk, button scissors and a few sponge, moss, glue and synthetic winterizer.

Manipulations for the manufacture of wood

If you decide to make a tree with your own hands, the master class presented in the article will allow you to carry out these works quite simply. At the first stage, you need to prepare the fabric from which the elements in the form of circles are cut. In order to make these works as easy as possible, you can use a regular glass or a jar lid for marking. The circles are stuffed with padding polyester, and then sewn together. A bamboo stick or tree branch can be partially wrapped with green tape, which is fixed with glue. It is placed in a prepared pot in which a bamboo stick is installed. Moss must be laid on the surface, fixed with glue, and then the flower is glued to an improvised trunk.

If you want to make a tree from leaves with your own hands, then you can additionally strengthen these elements with glue. However, it is worth remembering that such a composition is very fragile. Install it in the nursery, for example, is not worth it. If you wish, you can decorate the pot with various elements, including buttons.

Making a coffee tree

A do-it-yourself children's tree can be made from coffee beans. This design will decorate the room, and the child will be able to help you in the process of work. For manipulations, a ball is useful, which is recommended to be made of foam. Stock up on super glue, brown thread, PVA glue, and a fairly thick tree branch. You will need coffee beans, a pot and gypsum.

First you will need to prepare a foam ball, which is wrapped with threads. This will most firmly strengthen the coffee beans on the surface. The ends of the threads are fixed with the same glue. It is important at this stage to note where the trunk will be located. A small hole is left in this zone, the diameter of which is 1 cm. Grains and threads do not need to be glued into this area.

If you decide to make a tree from leaves with your own hands, then this composition can be decorated with the mentioned elements, which are pre-dried. They can be varnished to prevent shedding at the moment of inadvertent touch. Now grains are glued to the surface of the ball, it is best to use PVA glue for this. It is advisable to apply the composition to a small area, and then glue the grains. When applying the elements, they need to be pressed a little. After the first layer of grains is glued, the structure must be left for about half an hour until it dries. After that, the master can begin to glue the second layer of grains.

Final works

In the intended place, you need to install a tree branch, sealing the remaining space with grains. For greater effect, you can use a glass cup, on the bottom of which gypsum is poured. To give it the appropriate color, you need to add coffee grounds to the composition. After that, the tree is installed in the mixture, the structure is leaning against the wall and left to dry completely. After that, you can add hazelnuts to the cup, decorating the trunk with a ribbon.

With their own hands can be made by any home craftsman. However, this may require special tools. It will be much easier to use branches prepared in advance. If you plan to make wood products with your own hands at home, then you may need a special knife. However, it is recommended to choose soft wood species for this.

Topiary (English) Topiary handmade) is a decorative tree of happiness, a symbol of wealth and prosperity in the house. Used in interior design, common in Europe. Topiary construction - pot, stem and ball: no restrictions on techniques or materials! However, we recommend that you follow the general rules for composition, color combinations and proportions. Further details on how to make a tree of happiness and what materials can be used.

Collection of master classes topiary

The selection is updated weekly with new master classes. Stay tuned: subscribe to (no more than 1 letter per week) or follow us on social networks. Also we invite you to write in the comments what kind of master classes you would like to see. We will definitely take into account all wishes!

New Year's topiary

Berries in the snow

New Year's topiary "Berries in the Snow" is suitable for both beginner needlewomen and experienced craftswomen who will draw new ideas and inspiration! The tree of happiness on a foam ball d = 12 cm, the base is halves of walnuts. The main decor is small foam apples and sisal balls.

Also, the crown is decorated with plastic snowflakes, sugar and smooth foam berries, bunches of stamens. The finished topiary is treated with artificial snow in a can. The master class is available in video format and in a step-by-step article with photos.

First snow

Christmas tree of happiness from dried chestnuts, acorns with hats, walnuts, as well as sisal and rattan balls, star anise, cinnamon sticks, plastic snowflakes, a garland of beads and foam berries.

Crown - on a foam ball with a cloth winding. The topiary is planted in a restored old pot, filled with gypsum and rubble. Master class from Alena Tikhonova in video format, as well as in the form of step-by-step instructions with photos.

coffee topiary

Garden of Eden

A tree of happiness on a bronze-painted foam ball, a crown of coffee beans glued in even rows with the core up.

The main composition runs diagonally and consists of layers of white petals, twigs of alder cones, foamiran and paper roses, stamens and bonsai grass. Also, 2 doves made a nest of sisal on the crown. A master class on coffee and rose topiary in video format, as well as in an article with step-by-step photos.

Spices of the East

For the decor of the topiary, only natural materials were used (except for the felt for the leaves and the satin ribbon for the bow). Coffee tree of happiness on a foam ball with a diameter of 8 cm in a brown ceramic cup. The trunk is a curved corylus branch painted in bronze.

Crown of coffee beans, central composition - dried citrus slices, bay leaf, felt leaves, salt dough "button". Small decor: peppercorns, cloves, cardamom, corn, dried peas, pasta bows and stars.

dew drops

Topiary from coffee beans with bronzing crown and trunk. An ornamental tree in a dark brown cup made of unbaked clay, with a polished corylus branch as a trunk.

The crown of coffee beans is decorated with a composition of fabric and foamiran flowers with satin ribbons. The image is complemented by a colorful butterfly on the reverse side. Throughout the coffee tree of happiness - a luxurious scattering of pearls.

coffee dreams

The small coffee bean topiary is a typical example of simple and quick production. The uncomplicated design and improvised materials do not require preparatory work. Thanks to this, the craft will take 1.5-2 hours, taking into account the drying of the glue. At the same time, almost all elements are interchangeable and easily accessible. We offer a master class on how to make a topiary - in video format and in an article with step-by-step photos.

Topiary with artificial flowers

Heavenly Harmony

Topiary "Heavenly Harmony" is made on a sintepon ball, planted on plaster in a plastic flower pot, the trunk is a curved wooden branch. The tree of happiness is decorated with homemade flowers made from viscose napkins, sisal balls, berries and fabric roses.

At the base are sisal balls, a pot of lace, satin ribbons and flowers. The composition is completed by a double satin bow tied under the crown on the trunk.

Spring awakening

The Flower Tree of Happiness "Spring Awakening" is a motley and luxuriantly flowering meadow, personifying sunny May days and warmth. Homemade flowers from napkins and felt, ready-made foamiran and fabric roses, sisal balls, stamens, leaves and small inflorescences were used. A decorative butterfly settled on the crown, and at the base of the topiary - a cute foam bird. The tree is fixed on plaster in a high flower pot with a perforated border.

The master class is presented in photo and video format with subtitles, tips and tricks from the author.

Charm

A purple-white flower topiary is made quite quickly, but laboriously - buds from cardboard egg trays are formed in several stages: cutting blanks, painting and assembling, gluing felt or organza leaves.

We offer step-by-step master classes in video (FullHD 1080p) and text format with photos.

The scent of spring

A wedding tree of happiness in white tones with green splashes in the form of artificial leaves, which are in harmony with light green sisal and a large green apple at the base, refresh and saturate the composition. Topiary on a ball of newspapers, a crown of apricot pits, the main decor is prefabricated flowers from cardboard egg trays.

An elegant thin trunk of a curved shape is a corylus branch. The decorative tree is planted on plaster in a low ceramic cup. The main elements are painted in rich white - in the style of Provence. The master class is available in photo and video format with detailed step-by-step instructions.

orange mix

Orange topiary from orange peels is made quickly, but requires preparatory work: drying orange peel and citrus slices takes 3-7 days. In addition to orange flowers, foam tangerines, berries, satin ribbons and pasta bows were used for decoration.

We offer a detailed master class in video, photo and text format with step-by-step instructions for making your own topiary.

money tree topiary

abundance

Money Topiary "Abundance" is made on a home-made ball with roses from paper bills. On the crown are symbols of abundance and prosperity. A frog settled on the ball, a bunch of grapes and placers of coins were placed. The pot is made by hand from plaster, painted in 3 layers with the effect of antiquity, stylized as a wallet with a metal zipper. The trunk - a curved branch of salex - is fixed in a pot with a plaster cast.

spring luxury

Money topiary on a ready-made foam ball with a curved trunk in a plastic pot. Gypsum casting was used to fix the trunk. Crown decor - do-it-yourself paper money roses, 99 flowers! Also used are sugar berries and stamens, plastic leaves and yellow paper roses.

The tree of happiness "Spring Luxury" is sustained in fresh and bright yellow-green colors. Topiary is perfect for a gift or decorate the kitchen interior. We have prepared for you a step-by-step master class with photo and video instructions, as well as a detailed presentation of the finished product.

Sea shell topiary

lavender sea

Decorative tree of shells and roses "Lavender Sea" - a beautiful and unusual topiary on 2 trunks in a neat painted pot filled with plaster. The crown is decorated with shells (painted with mother-of-pearl acrylic), delicate roses made of ceramic clay and purple sisal balls. In addition, the tree of happiness is decorated with buttons wrapped in satin ribbon, smooth berries and sisal balls.

Blue Lagoon

Marine Topiary "Blue Lagoon" combines the beauty of nature with artificial decor. Snail shells, which form the basis of the crown, are painted with ultramarine acrylic paint. The compositional center is a half of a large rapana. The pot is a tin can decorated with ice cream sticks, shells and waste material. At the base of the tree, on a scattering of small shells and sisal, a blue decorative bird is planted.

coral reef

The sea topiary is made from a variety of shells with homemade ceramic plasticine roses and sisal balls. Shells are painted in coral, mother-of-pearl and pale blue.

The composition of the tree of happiness is complemented by bright plastic inhabitants of the seas and oceans: crabs, an octopus, an asterisk. The ball is wrapped with twine and sisal, the barrel is polished, gypsum filling is used, and the pot is wrapped with linen rope.

Topiary in the shape of a heart

sapphire heart

Topiary from coffee "Sapphire Heart" with a foam base 15 cm wide, a curved salex trunk is planted in a lilac plastic pot on plaster. The heart is thickly pasted over with coffee beans, dyed in 2 layers: bronze and white. The crown is decorated with foamiran roses, two types of artificial flowers, green leaves, alder and larch cones, as well as small cones. The trunk is painted white.

On the wings of Love

The heart-shaped topiary combines a textured coffee surface with a delicate floral decor. Roses made of keramplastiline in various shades of pink are in harmony with a butterfly and a scattering of pearls with stamens. The tree of happiness is planted in a white ceramic cup, the trunk is made of a curved branch of corilus (salex). Delicate wings made of natural feathers complete the composition.

autumn topiary

Walk in the garden

Topiary "Walk in the garden" is made of artificial fruits and vegetables, flowers and small inflorescences. The trunk is painted with chocolate acrylic, for color support the crown is also decorated with dried chestnuts. On top is a nest with quail eggs, and on the other side is a straw hat with a rapeseed ribbon. At the base of the fruit tree, a decorative bird settled down. The topiary is planted in a metal bucket, the trunk is reinforced with a plaster cast.

magic meadow

The autumn tree of happiness turned out to be unusual: a successful combination of natural material and artificial decor. Chestnuts, acorns with hats, walnut shells, apricot pits, sisal are harmoniously combined with berries, foam fruits and vegetables, artificial flowers and grape leaves.

The composition is complemented by a decorative dragonfly and snail shell. A dense meadow with well-arranged gifts of autumn, a tree of happiness in orange-brown tones.

Notes of autumn

Original topiary of chestnuts, acorns with cupules, halves of walnuts and sisal. In addition to natural material, decor was used to decorate the crown: artificial dog rose, smooth and sugar berries, foam stamens.

At the base of the autumn tree is a composition on decorative moss. The clay pot is decorated with wooden sticks and coffee beans, and the edge is painted with yellow acrylic to connect with the napkin roses on the crown.

Autumn mood

Fragrant topiary "Autumn Mood" with the use of natural materials: flowers made from orange peel, dried citrus slices, peeled apricot and peach pits, cinnamon, acorns, dried flowers. The trunk is a twisted branch, a clay pot filled with gypsum (for a strong fixation of a heavy tree of happiness).

We offer a step-by-step master class on a natural tree of happiness: a text version, a photo and a full-fledged MK video in FullHD quality with subtitles. Choose the format that's right for you!

Seasons

The Tree of Happiness is an unusual format: a series of workshops in the same style, but with a different set of materials. Autumn theme - from acorns, cones and orange flowers. Christmas theme - with larch cones, red stamens and artificial grass. Spring theme - with pink foamiran roses, cones and bonsai branches.

Each topiary is planted on a plaster cast in a metal bucket, the trunk is 2 curved branches of the corylus (salex). A foam Christmas tree toy with a diameter of 4 cm was used as a ball.

Birdsong

A topiary made of chestnuts, acorns and nuts with decorative doves and a ladder is planted in a small clay pot on plaster. The crown is decorated with acorns with pearls and prefabricated decor: satin bows with white sugar berries. The curved trunk and the ladder are painted with bronze, at the base on the widths of sisal, doves settled in a twisted nest. The pot is decorated with a satin ribbon and lace.

Topiary design elements

Crown

The basis of the tree of happiness in 9 out of 10 cases is a ball: a spherical shape is ideal for crown formation. Other original forms are also used to make a topiary: a heart, a horseshoe, a dollar, a three-dimensional wreath, a star or an egg. In needlework stores, you can buy foam blanks, however, it is very easy to make a ball yourself: from pressed newspapers, padding polyester, cardboard or fabric scraps, polyurethane foam. In addition, any spherical shape can be used, such as a skein of knitting thread or a baby ball.
We offer a detailed overview, which describes the techniques, as well as showing a variety of ready-made solutions.

In some cases, for example, for coffee beans and flowers from corrugated paper, as well as for the quick production of decorative wood, it is much more convenient to use a ready-made foam ball.

Trunk

Wooden branches, Chinese chopsticks, long barbecue skewers, a pencil, wire, a thin tube - any strong object of a straight or curved shape, suitable in length and diameter for a particular design, is used as a trunk for a tree of happiness.

The choice of trunk for the topiary is not limited, but the weight of the crown should be taken into account so that the branch does not break.

Pot and methods of attaching the trunk

The stability of the base, the ability to strengthen the trunk, the shape suitable for the design of the crown are the main criteria when choosing a container in which to A the tree of happiness grows. In addition, the shape must match the chosen crown design, the pot is decorated depending on the design of a particular product.
For fixing the trunk, pouring with plaster or fixing with crushed stone with glue processing is used. The filling of the pot is hidden under the decorative composition at the base of the trunk.
We offer a detailed review, with or without plaster: pouring secrets, recommendations, photo and video master classes.

Materials for making a tree of happiness

Finished decor

To make a topiary, you will need a wide variety of ready-made materials for needlework:

Satin ribbons, bows.
Organza, felt, mesh.
Flowers from foamiran.
Sisal and.
Beads, glue half beads.
Corrugated paper.
Finished decorative elements: artificial flowers, fruits, berries.

From natural and improvised materials for a tree of happiness, the following are popular:

Coffee beans.
Pasta of various shapes.
Cinnamon sticks, peppercorns, bay leaf.
Dried orange, lemon, mandarin - peels, slices.
Decorative stones, pebbles, glass.

Homemade decor

The basis of the composition of almost any tree of happiness (with the exception of express topiary, on which mostly ready-made elements are glued) is a prefabricated decor made of various materials. Most often, these are pre-collected flowers.

How to make a do-it-yourself topiary - step by step instructions

Preparation of prefabricated decorative elements.
Making a ball or using a foam blank.
Crown decoration in the chosen technique with pre-prepared elements.
Making the pot and fixing the trunk - pouring with plaster or fixing with crushed stone.
Assembling the tree of happiness.
Final decoration of the topiary.

The proposed step-by-step instructions on how to make a topiary are indicative: for convenience, some steps can be swapped or combined.

The symbolic meaning of the tree

The tree symbolizes development, dynamic growth, seasonal wilting and restoration, wealth and prosperity. Branches mean versatility, a variety of choices, and a common trunk is a symbol of unity. In mythology, a tree is a magical, powerful image, the abode of gods and spirits. In the practice of Feng Shui, the tree of happiness in the house is a symbol of prosperity, abundance and wealth. In addition, a self-made topiary is an original gift, a sign of respect and love, a real surprise for connoisseurs of handmade crafts.

Excursion into history
The etymology of the word "Topiary" comes from the ancient art of curly cutting garden trees and shrubs - "Topiar" (Topiar material from Wikipedia). From Latin topiaria- horticultural art, actively developing in Europe since the time of the Roman Empire. Shrub sculpture was done by specially trained slaves - topiaries.

Do-it-yourself topiary - an exclusive collection of master classes! Step-by-step photos of how to make a tree of happiness in 1 picture: flower, coffee, autumn, New Year and other types of topiary. Convenient master class format: step by step instructions in 1 picture!

The selection is updated every week: do not miss new releases, subscribe to or join us on your favorite social networks!

New Year's topiary