Decorative trees made of artificial materials are ideal for decorating your home or office. They will perfectly fit into the design of any interior, creating a cozy atmosphere in the room. Such hand-made crafts do not require special conditions of maintenance and careful care compared to living plants. From this article you will learn how to make artificial trees with your own hands in different ways.

artificial pistachio tree

You will need:

• Gypsum;
• Pot;
• Pistachio shell;
• Spray paint gold;
• Wire.

How to make a tree with your own hands from pistachio shells:

• Using a drill, make a small hole in each shell;
• We cut the wire into segments 15-20 cm long and fix one shell for each of the segments. Next, we twist the wires and get blanks;

• We connect several leaves together by twisting the wire. Thus, a branch is obtained;
• We make several branches and twist them together - we get the trunk of a tree;

• We wrap the branches and the stem part with FUM tape. Instead, you can take a thread or rope;
• Let's paint the craft;

• Let's prepare the base: we will prepare a pot suitable for crafts, which we will fill with plaster and insert our “golden” masterpiece into it;
• Let's wait until the plaster dries. We paint the pot with paint;

• Additionally, we make out the finished craft with coins.

Similar ideas for hand-made crafts can be found in the article.

Master class on making decorative poplar

Such a beautiful "poplar" is a great decoration for a house or street.

Required materials:

• Candle;
• Glue;
• Needle;
• Matches;
• Thin and thick wire;
• Pot;
• Gypsum or cement;
• Gray and green threads;
• Green plastic bottle;
• Scissors.

Step by step master class with photo:

• We separate with wire cutters from a thick wire 3 segments that are identical to each other, connect to each other by twisting. We wrap the ends of the blanks on one side;
• We dilute the fixing mixture, pour the solution into the pot, put the “poplar” trunk with curved ends there. We are waiting for the mass to solidify, and at this time we are making artificial branches;
• We cut squares of different sizes from the bottle, cut out the leaves from them. We heat a needle over the flame, make holes in the upper part;

• Insert a thin wire into them, fold in half, twist. We combine three branches into one and make several identical blanks;
• Next, for the manufacture of crafts for the home interior, we take several blanks, which consist of three branches, and connect them together;

• We close the wire part with the help of gray threads, fix the ends with glue. We leave the lower part of the branch free, which we attach to the trunk;
• Using the same method, we make the entire “poplar”, we wrap its stem part with a gray thread;
• To imitate grass, cut green threads of the same size, fold them in half. Lubricate the bending points with glue, fasten the blanks to a cement or gypsum base.

Thus, we get beautiful artificial trees in pots that can safely stand both at home and on the street - they are not afraid of rain and bright sunlight.

artificial home apple tree

It is advisable to place such decorative artificial trees only indoors, because their flowers are made of yarn.

You will need:

• Glue;
• wire cutters;
• Cardboard;
• Hook;
• Scotch;
• Wire;
• Pencil;
• cement or plaster;
• Scissors;
• Brown and green fabric;
• Pot;
• Red and brown threads.

Stages of work:

• We cut off with wire cutters six wire blanks of 30 cm each, five - 25 cm each, and twenty-two - 4 cm each;
• We attach with tape to a large wire branch 3 small ones. Let's make some preparations. Branches can be wrapped with matter, for example, velvet or fleece;

• We cut strips 2 cm wide from brown fabric. We wrap them with blanks of branches (several pieces), leaving 3 cm free at the bottom. We fix the ends of the matter with glue;
• We collect the blanks into a single "apple tree". We cut off a strip of 3 cm from the fabric, wrap it around the canvas and the branches connected to each other. We also fix the fabric ends with glue;

• To make a decorative apple tree further, we install it in a container with a narrow neck. If such dishes could not be found, then in order to fix the “plant”, we pour cement or gypsum mortar into the container. We straighten the branches and begin to decorate our craft;
• Now we will cut leaves of different sizes from green matter, and singe their edges over the flame, not bringing them very close to it so that they do not spread;

• We glue the leaves on the branches and begin to create fruits that are made from. Cut out 2 circles from cardboard, 3 cm in diameter. We draw a smaller circle inside and cut it out, we get 2 cardboard rings;
• We connect them into a single part, we wind a red thread on it with a hook. The yarn should completely “hide” the workpiece. We cut it from the outer edge, lay a brown thread and use it to tighten the resulting pompom;

• Cut out leaves from green material, glue on a brown thread;
• We hang ready-made "fruits" on the branches. You can also decorate the pot as you wish.

Volumetric tree on the wall

This unique 3D decoration can be made by hand on the wall (and even on part of the ceiling) without any problems. To get a real masterpiece, it is not necessary to have the knowledge of a sculptor or artist.

Important: This decor requires a lot of space.

You will need:

• Master OK;
• Bucket;
• Marker and scissors;
• Acrylic paints and brushes;
• Scotch;
• A bag of dry gypsum;
• Large sheet of cellophane film.

Progress:

• Let's draw a contour mirror image on a cellophane film with a marker, and when we cut out the traced middle, we should get a stencil;
• We stick it on the wall with adhesive tape;
• Pour water into a bucket and dilute gypsum;
• Carefully fill in the empty stencil space with the help of a trowel;
• Remove the film after the mixture has dried;
• We apply a few more gypsum layers, the last one is rounded;
• When the solution dries well, paint the sculptural image with acrylic-based paints.

You can choose from a variety of palettes. In the living room, a “natural” image will look great, in a children's room on the wall - a fabulous tree, unusually painted.

decorative tree from branches

To decorate the interior of your home, you can make large artificial trees with flowers.

Necessary materials:

• Glue hot gun;
• Twigs;
• Sea pebbles;
• Square flowerpot;
• Decorative flowers (you can - paper);
• A piece of foam.

How to make a decorative tree yourself from ordinary branches:

• We fill the bottom of the flowerpot with sea pebbles and put foam plastic on them, and insert the prepared branch into it;
• We sprinkle it again with sea stones for good stability, insert moss on top;
• Now we decorate the branch. To do this, glue the decorative flowers randomly to the branch with a glue gun;
• After the end of this procedure, such a decorative craft will rightfully serve as a decoration for your house or apartment.

On the Internet, you can find many photos of trees made by yourself, choose the option that suits you and create your own masterpiece based on it. For another interesting idea for creating an artificial tree, see the video below.

Video: How to make a do-it-yourself LED tree

Topiary - means "tree of happiness." This type of art is very popular today. This fascinating process originated in ancient Rome - bushes and trees were cut in the form of balls and other figures. Today, the topiary is a design element of modern premises. Such interesting products decorate any interior, giving mystery and special zest.

Do-it-yourself topiary for beginners: step by step photo

Step-by-step instructions - a useful helper for beginners to make a beautiful tree with their own hands. Using a simple example, we will try to get acquainted with the design technique and the principle of operation.

Topiary materials:

• Ready-made foam ball (2 pieces of different sizes);
• Cotton threads or ribbon;
• A skewer or a thin tube;
• Any decor (for example, inanimate flowers);
• Any base is a cup;
• artificial grass.

This process begins with the manufacture of the stand. A foam plastic of the appropriate size is placed in the cup. The skewer is tightly wrapped with decorative tape and placed in the cup so that in the end the base is held steady and does not fall. If necessary, the blanks can be smeared with glue. are divided into separate branches and then each flower, separately, is tightly stuck into the base. The finished crown is pierced with the end of a skewer, smeared with glue. The stand is adorned with artificial grass to completely hide the bottom base.

It doesn’t take long to make such a topiary with your own hands, the main thing is to have a great desire and creative inspiration.

Step-by-step master class: topiary for beginners

Any master class is attractive in its own way. But what is needed for a topiary? How to make a topiary with your own hands? Where to start?

To make a tree you will need:

• The ball is a foam base;
• White and pink fabric flowers;
• Carnations with beads at the end;
• Satin ribbon;
• pot;
• Decorative grass;
• Ready-made white-painted trunk (from a needlework store);
• small needles;
• Hot glue;
• Gypsum and water.

There are no clear types of topiary, as it is an individual and unlimited fantasy for creativity.

Step by step:

• First, we prepare the platform on which the base will hold. Stir gypsum with water until plasticine is thick.
• We place the mixture in a pot and carefully immerse the finished trunk there. The trunk should be installed evenly and held a little with your hands so that it does not bend and the plaster does not have time to fix it when it dries.
• We make a recess in the ball for stringing it on the trunk.
• On a foam ball with hot glue, just a drop at a time, glue the flowers tightly to each other to avoid translucence of the white base. Next, fix each flower with a carnation.
• Pour a little liquid glue into the recess and fix the crown on the leg.
• For decoration, we tie a pink ribbon with a bow at the junction of the trunk with the crown. We mask the gypsum in a pot with decorative grass.

A pretty tree is ready!

Flowers on the ball can be mounted in a chaotic manner, alternating pink with white. Or purposefully decorate half of the crown in pink and the other in white.

Gypsum can be replaced with earth or other natural soil.

Do-it-yourself topiary for beginners (video)

Topiary is an endless field for the embodiment of bold creative ideas and unlimited abilities. A do-it-yourself tree of happiness will bring a lot of pleasure even from the very creative process itself. But in the end, of course, it will please the eye and create a special atmosphere in the house. Moreover, today the notes of Feng Shui are actively traced.

Topiary for beginners (photo)

People have always decorated their houses with various plants to ensure well-being in the family. One of the most powerful talismans is the tree of happiness. With it, you can attract wealth, good luck and positive emotions.

Many people buy houseplants, but sometimes they don’t even realize what extraordinary power they can have. Some of them have a positive effect on the energy background of your apartment, and also attract good luck and financial well-being. Unfortunately, allergy sufferers are unlikely to be able to afford such a decoration in their home, but in this case, you can make an effective talisman with your own hands.

The tree of happiness is one of the common interior items. People can purchase such decoration or make it with their own hands. In the latter case, you can give the talisman more strength by endowing it with your energy, and then you will not have to doubt its effectiveness. He will attract happiness and prosperity to your home and save your family from life's difficulties.

What is the power of the tree of happiness

Throughout history, China has given us many powerful talismans and amulets, and the tree of happiness is no exception. Initially, the Chinese made it with their own hands from natural stones. The inhabitants of this country believed in the special power of minerals: it was believed that they were able to attract happiness, wealth and love. Feng Shui masters claim that such a homemade plant can activate any place in your home, no matter where you place it. The talisman will absorb negative energy and release positive energy, because of which your family members will be able to feel a surge of strength and achieve their goals. That is why the tree of happiness will become not only your protection, but also a magnet that attracts good luck. It can radically change your life for the better.

When purchasing a ready-made talisman for specific purposes, pay attention to what stones it is made of. If you want to attract health, then a tree of happiness with agate or serpentine leaves will suit you. To attract money, give preference to jet. For those who lack luck in life, stones of blue and turquoise colors, symbolizing happiness, are suitable. A multi-colored tree will help you maintain balance in everything.

To achieve your goal, the location of the talisman is important. According to feng shui, the southeast is a zone of wealth, therefore, by placing your tree of happiness in this direction, you can lie down financial well-being. The southwest side is the direction of love. And by placing the plant in the eastern part of the house, you can protect the health of all households.

How to make a tree of happiness with your own hands

As you already understood, in order to give the talisman a special power, you need to make it yourself. If you decide to make a tree of happiness with your own hands, do not be afraid that it will take you too much time, and the materials will cost you dearly. You will need:

• a flower pot where you will install a tree;
• a branch or stick to make a trunk;
• ball to complete the crown. You can buy ready-made plastic or foam;
• colored paper for making buds;
• cement. It is necessary to pour it into a pot so that the tree trunk does not fall and break due to the severity of the crown;
• glue and elements for decorating the mascot. It can be stones, ribbons, shells and so on.

Prepare all the necessary materials in advance. First, prepare the cement mortar, and then pour it into the pot, before that, placing a stick in the middle of it, which will be the trunk of your tree. You can cover it with paint in advance. Wait for the cement to harden and start making the crown. Many people who want to make their tree stand out cut the top of the tree out of crepe paper or fabric, but if you're not a natural designer, you can just make it out of colored paper. To do this, take small sheets and give them a spherical shape so that they look like buds. Take a plastic or foam ball and make a hole in it so that you can install it on the barrel. Start sticking your flowers on it. After that, you can decorate your talisman. Shells or stones can be placed on top of the cement, and the tree itself can be decorated with ribbons, beads, ordinary buttons, and so on.

After these simple steps, install a tree of happiness in any area of ​​\u200b\u200byour apartment and do not forget to update its design from time to time.

Making talismans and amulets is not a difficult task. Most of them can be quickly and easily done by hand. And in order for them to bring as much happiness and good luck as possible, it is necessary to give them strength with the help of an effective conspiracy. The site site team wishes you success,and don't forget to press the buttons and

20.10.2017 04:16

In autumn, everyone has a chance to change their lives for the better and find what they want. Thanks to efficient...

From time immemorial, people have tried to decorate their homes - it does not matter if it is a cave of a primitive man or a modern apartment. They always tried to decorate everyday life with stucco molding, drawings, and painting. In almost all drawings and murals, a person put a sacred, magical meaning.

People tried to decorate not only housing, but also the area around. The custom of decorating trees (such decorations include giving a certain shape to the crown of a tree) has become a kind of cult.

Since ancient times, there have been holidays that were dedicated to nature, life cycles. At such holidays, trees played a major role.

Ritual actions with trees moved smoothly into garden architecture in the days of Ancient Rome. Topiary or topiary is a garden in which trees grow, more like garden sculptures. Skilled gardeners trimmed the branches and crown so beautifully, intertwined branches that trees and shrubs took on intricate shapes.

Topiary in the modern world

Today we can make a topiary on our own. In today's world, it is not at all necessary to have your own garden in order to have a topiary. Today it is a small original tree, which is also called the tree of happiness or money. Making it yourself at home is not difficult at all.

In order for you to get a tree of happiness at home, you only need a few things:

A small pot or stand. A very important nuance is that the pot or stand should not be larger than the diameter of the base of the tree.

A small stick that will serve as a trunk. Tree base. There are quite a few forms of the base, but the most common is the shape of the ball.

Tree crown. For a more beautiful crown for decoration, you can use a variety of improvised tools that can always be found in any person’s house: coffee beans, pistachios, bizarre-shaped pasta, acorns, buttons, beads and others.

The base can be purchased ready-made (ready-made foam blanks are sold in needlework stores) or made independently from improvised means.

The trunk can be made of thick wire, a pencil or a dried twig, which is pre-wrapped with twine or tape.

In order to make a crown, take plain paper, corrugated paper or multilayer napkins. A ball can be formed from a newspaper, wrapped with thread or twine. For strong fixation - cover with a small layer of PVA glue.

Once the glue dries, cover the ball with paint or varnish. Next, you can stick the selected flowers, moss or other decorative elements.

To decorate the crown, you can use any available materials - leaves, coffee beans, satin or silk ribbons, acorns and others. The finished design can also be supplemented with colored pasta of intricate shapes, buttons, pistachios.

Topiary on your own - step by step instructions

If you decide to put such a tree at home, we will teach you how to make a topiary with your own hands from improvised means.

Prepare everything you need in advance:

• finished round billet;
• nice bowl;
• not real flowers;
• a pencil or a wooden stick of a suitable color and length;
• a ball of the same diameter as a mug;
• artificial grass or moss.

The first step - a pencil or stick is best decorated with a ribbon. Place in bowl and secure in bowl with mounting foam.

The next step is to place artificial flowers on the workpiece. Note that it looks nice when there are no empty spaces. Now you can string the finished top of the tree onto the trunk.

You can decorate the edges of the mug with decorative moss or grass. To make a beautiful topiary, you can plant a butterfly (artificial).

Do-it-yourself boxwood topiary

In order to make a boxwood tree of happiness you will need:

• natural or artificial boxwood branches;
• nice bowl;
• flowers made of paper, felt and other substitutes;
• gravel as a filler;
• round blank of expanded polystyrene;
• fishing line or thin wire.

If you take branches instead of a pencil or a stick for the trunk, pull them off after using the wire. After the work done, the spherical blank must be mounted on the trunk.

Place the trunk with a crown in a container into which gravel was previously poured. Lay moss or artificial grass on top. The crown can be decorated with small flowers, which are placed between boxwood branches.

If you are still in doubt and cannot decide which tree you want to make yourself, we recommend that you look at a photo of a do-it-yourself topiary. Such photos can be found on sites for needlework.

DIY topiary photo

Ornamental trees are considered worthy decoration of the house. They are appropriate in any interior, you just need to think in advance about the color scheme that fits into the finished design project. Ornamental trees do not require special conditions of maintenance and care. They do not need to be watered as they are artificial plants. These decor items are freely sold in stores, but it is better to make a topiary with your own hands. It will take some time to make it, but in the end you will get a unique decorative tree that fits perfectly into the existing interior of the room. And it is better to build a topiary on your own, because according to the Chinese ancient teachings of Feng Shui, this tree brings joy to the house. Making an ornamental tree, a person charges it. According to legend, the topiary can bring happiness only to its creator.

Topiary: the history of appearance and meaning in a modern interior

The word topiary or topiary comes from the term "topia" - an ornamental garden plot. The concept came from Ancient Rome and meant various figures carved from the crowns of trees or bushes. The ancient Roman civilization disappeared, but the Catholic Church picked up the ideas of beautifully decorating gardens. Then the topiary entered the secular life. Their heyday came in the 17th century: it was then that decorative trees appeared in the residences of the rulers of states, incl. and in the Russian Empire. Then they were forgotten about, but in the 20th century, topiaries became popular again. Now they no longer decorated the gardens and walls of palaces, but were planted in pots. Today, topiaries are no longer planted. They can be made from any material. Topiaries are made in the most bizarre shapes and colors, often quite controversially combining materials. In another way, they are called trees of happiness, believing that they bring joy to the house. They can be made from:

• coffee beans;
• walnuts;
• fir cones;
• straw;
• sweets;
• napkins;
• silk ribbons;
• plastic bags, etc.

Where to start assembling a tree

The assembly of the topiary must begin with planning the appearance of the future tree of happiness and finding the right details. The appearance of the topiary is determined by the style of the interior for which it is made. To begin with, there are materials necessary for constructing the base of the tree. In any case, you will need tapes, glue, colored paper, polystyrene foam, polyurethane foam, etc. The list of parts is limited only by the imagination of the creator. After collecting the necessary things, you can begin to create a topiary. First, the trunk is assembled, because. it is the basis of the topiary. Moreover, it must not only be strengthened, but also varnished or painted. Then one end of the trunk is attached to a pot, stone or shell, and a ball is hung on the other, which will later become the crown of a tree of happiness. To fasten all parts of the topiary, it is best to use glue.

The basis

To construct the basis of the tree of happiness, everything that is at hand at this moment will do. To make a base from newspapers, first you need to crumple them well, and only then form a sphere according to the given parameters. Newspapers are crumpled and tightly pressed, after which they are wrapped with tape. The base can also be made from newspaper clippings, but in this case they should be folded into a plastic bag. If you need to make a small base of synthetic winterizer, first you need to tamp it into a sock or stocking, then give it the necessary shape and wrap it tightly with sewing threads. It is even better to make this foam base using ordinary packaging from household appliances. But the foam crumbles, it is inconvenient to roll it into a ball, so this base is not very popular. In addition to the above, the following materials can become the basis of the topiary:

• mounting foam;
• Knitting thread;
• papier-mâché, etc.

Trunk

The trunk of the tree of happiness connects the base with the crown, so it must be strong and stable. In its role can be an ordinary wire, fixed with artistic tape, twine or plastic. For the realism of the product, this trunk can be made from a wooden branch or a piece of wood. But first, this branch must be cleaned of bark, varnished and stained. If a low topiary is made, then as a trunk, you can take a popsicle stick, sushi sticks or wooden skewers fastened together. The color and type of the trunk depends on the material of the base and crown. For topiary with coffee beans, white or brown is suitable. A curved trunk for a European tree can only be made of wire. You can also take any material that is approximately suitable for the topiary trunk, decorate it and fill it with plaster.

Crown

For the manufacture of a topiary crown, absolutely any materials that are currently at hand are suitable. To do this, you can take paper napkins, corrugated paper, folded origami, nylon ribbons, etc. Then the crown must be decorated. To do this, take spruce cones, real seashells, coffee beans, artificial flowers, etc. The crown is the main accent of the tree of happiness, so its design must be taken very seriously. The trunk and stand only emphasize the general theme of the topiary, so it is advisable to first decide on the material for the crown, and only then design the rest of the tree. But the topiary trunk may not withstand too large a crown, so it should not be overloaded. Some elements can only decorate the stand of the tree of happiness.

Stand

As a stand for a topiary, you can take an ordinary flower pot, a large flat stone or an iron bucket, decorate them beautifully and put them under the crown. The decor of the stand of the tree of happiness can be anything. It is decorated using the decoupage technique, decorated with lace or bright unusual shreds. You can stick stones, shells and artificial flowers on the stand. This element of the topiary is a semantic continuation of the crown, so its design must be based on the already existing elements of the decorative product. If the tree is decorated in a marine style, then shells and multi-colored pebbles will be appropriate, and for a romantic-style topiary, you will need lace and hearts made of colored paper. In size, the crown of the tree should be larger than its stand, so that the composition looks harmonious.

Wood making workshops

Making a topiary with your own hands is easy. To do this, you do not need to have an artistic taste or education as a designer. The ideal tree of happiness is decorated intuitively from the available materials. There are many tutorials on the Internet on this topic, some of them are presented below, but you should not follow these instructions step by step. According to feng shui, topiary quickly and effectively activates any sector of an apartment or house, instantly filling it with the necessary energy. But for proper operation, it must be decorated with the necessary elements. To normalize family relations, jasper or amazonite should be glued to the topiary stand. A tree with a tiger's eye, charoite or turquoise will help you climb the career ladder. And to improve the general financial situation, you need to decorate the topiary with a jet or a hawk's eye.

From coffee beans

For this topiary, you need to take high-quality large coffee beans and stick them on the base for the crown, laying them out with the central strip down. The ball is covered completely. For this, it is better to take a glue gun, although you can do without it, using ordinary glue from a tube. When the ball is completely sealed, a plastic tube is taken, which is sealed along the entire length with double-sided tape, departing from both edges 2-3 cm. A satin ribbon, fabric or corrugated paper of the desired color is glued onto the tape. Then you need to dilute the alabaster and pour the resulting mixture into a pot or an iron bucket. Then a barrel is inserted into this mixture and they wait for the alabaster to harden. After the mixture has hardened, its surface is spread with coffee beans in 2-3 layers. A finished crown is glued on top of the trunk itself.

The resulting topiary can be decorated with an elegant bow or jewelry.

From cones

Do-it-yourself topiary from cones is made according to a similar pattern. Small half-opened pine cones are glued to the foam ball with small gaps from each other. If the gaps are too large, they can be filled with acorns or chestnuts. For additional fixation of the elements, you can use golden or brown threads. To make the barrel, you need to put together several (up to 10) bamboo skewers, wrap them with a thick white or brown thread, leaving open areas along the edges of the sticks. Then you need to dilute the alabaster with water or take the finished cement mixture, pour it into a flower pot and insert the tree trunk into the base. When the mixture hardens, it is decorated with needles or sisal, a fully decorated crown of a tree of happiness is attached to the trunk, and the pot is decorated with a satin or lace ribbon.

From satin ribbons and other fabrics

As a basis for a satin ribbon topiary, you can take a foam sphere or a ball of crumpled newspapers, fixed with thick threads dipped in PVA glue. Then you need to take satin ribbons of any color, twist them into small rolls, after bending the ribbons at a right angle. You need to bend the satin ribbon several times until its length is over. As a result of these actions, you should get a rosebud. At the end of manufacturing, it is necessary to flash all the petals with a thin silk thread at the base. The number of such roses is determined by the size of the base. Usually 20-30 flowers are required. Then they decorate the crown of the topiary. As a trunk for such a tree, you can take an ordinary twig, and use a clay flower pot for a stand. The stand and tree trunk should be decorated with elegant green leaves made of satin ribbons or silk.

Corrugated paper

First you need to take a round foam ball. Then you need to make roses from corrugated paper. If they are very large, then there will be a lot of free space between the flowers, which will need to be closed with something, so it is better to make these roses medium. One small topiary will need 35-45 roses. To do this, it is better to take paper of different colors in order to alternate the shades of roses on the topiary in the future. The trunk for a tree of happiness can be made from traditional sushi sticks, and ordinary foam can be used as a primer. Alabaster is hard to make, but Styrofoam is easy to find. Only the barrel must be inserted into the foam base the first time. At the same time, it is necessary to decorate the crown by gluing roses in a chaotic manner. Then the crown is attached to the trunk and the topiary is considered ready. If desired, the soil in the pot is laid out with artificial grass, and the trunk of the tree is decorated with a bright bow.

A sea tree of happiness can be made from materials brought from the sea: pebbles, shells, dried crabs and pearls. They should paste over the base for the topiary crown. If there are few shells and pebbles, the space between them can be decorated with sisal, artificial starfish and marine-themed salt dough crafts. When making a topiary trunk, it is better to take sushi sticks decorated with white, blue or sand-colored satin ribbons. As a stand for a tree of happiness, you should take a white flower pot, which can be decorated with artificial pearls, lace and small figures from salt dough. Inside this pot, you need to fill it with alabaster and insert the trunk of the topiary into this alabaster mixture. Sisal fibers, sea pebbles and shells can be placed on top of the frozen fill.

Money topiary from coins and banknotes

This topiary is usually made from counterfeit banknotes, but for entourage, you can attach real coins to a tree crown or stand. Of course, it is better to use not ordinary, but rare, old or foreign coins. To begin with, each bill needs to be folded in half, slightly moving the edges, and then folded into an envelope from it, securing the uneven edges with double-sided tape. The number of banknotes depends on the size of the base ball, but usually about 20-25 banknotes are required. The trunk of a money tree can be made from twigs or sushi sticks, and a planter can be used as a stand. The cache-pot on the outside can be decorated with special self-adhesive paper with the image of money or lace. Alabaster is poured into the pot itself, a trunk is placed in it and they are waiting for it to dry. After that, the topiary soil is laid out with coins, sawdust or decorative stones.

From dried flowers and fresh flowers

A tree made from dried flowers is quite simple. You can decorate the base for the topiary crown with dried flowers and yellowed leaves, but the flowers and leaves taken for these purposes must be strong and dense, otherwise they will simply fall apart during work. Dried flowers are fixed directly on the foam ball. A curved branch from the street is taken as a trunk, and an ordinary clay pot turns into a stand. The pot is poured inside with alabaster, after fixing the trunk of the topiary. This trunk is inserted into the finished crown of the tree, and the dried alabaster is decorated with dry leaves and flowers. Fresh flower topiaries are usually created by professional florists, but you can try making your own at home. To do this, you need to take rosebuds, chamomile flowers, lilies or chrysanthemums, cut their stems correctly and carefully and attach them to the crown base. Otherwise, the technique for producing a tree of happiness and decorating a topiary pot is similar to its manufacture from dried flowers.