If you're the kind of person who gets creative with even sorting junk material, this article is just for you. When there are tin cans left in the house, we either throw them away or make a simple ashtray. In this article, we will look at what else can be made from tin cans.

Tin vase

In the needlework store we purchase the necessary materials: a ribbon, blanks for an album using the scrapbooking technique, you can use different types of decorative paper for creativity.

Butterflies from tin cans

Products from tin cans can become a full-fledged decor for the holiday.

1. First, we draw a template on paper, and then transfer it to the tin itself.
2. After all the blanks are cut out, we proceed to the main part of the work. An important point: if you want to make patterns along the contour of the wings, step back about a centimeter from the edge when you cut it out.

3. Marker draw patterns on the wings.

4. Now, with the help of a hammer and an awl, we begin to gently move along the pattern. Instead of an awl, large nails or something similar will do.

5. Crafts from tin cans in the form of a butterfly are almost ready. With the help of acetone, remove the remnants of the marker and cut out the workpiece along the edge. In narrow and very curved places, it is better to use nail scissors.
6. To make our products from tin cans look more realistic, we will make a little body from a bead and wire.
7. First, we take a colored wire of a bright color and thread it through the bead. We twist the ends. We fix the body with a thinner wire.
8. Here are such unusual children's crafts from tin cans you will succeed.

Tin Candlestick

For crafts from tin cans, we need a nail with a hammer, a piece of wire and a candle.

Empty cans from beer and various drinks can be the source material for creating a variety of crafts. Some beer can crafts are purely decorative, while others can be a useful accessory for the home and garden. Check out 5 ways to make interesting DIY tin can crafts!

beer can lamp

Cans of beer and lemonade can be turned into openwork shades for a lamp. To do this, cut off the upper part with an opener, scissors or a clerical knife. Then outline the pattern and make holes using nails of different diameters, screwdrivers and other sharp objects that will leave curly holes. So that at the same time the jar does not wrinkle - you can stuff paper very tightly inside. If desired, the jar can be painted both outside and inside. It remains only to attach a cartridge with a light bulb - and the original beer can lamp is ready.

The second option for creating crafts from beer cans in the form of a table lamp is to use only tabs from aluminum cans for the lampshade, and the can itself will serve as the leg of the lamp. To connect the tongues into one sheet, make a cut on each tongue from above, interlace them together and bend the cut with pliers. You can also use thin wire or thread.

Garden furniture - crafts from beer cans

Unusual, but quite functional use of aluminum cans for drinks. From them you can make garden furniture - an armchair and a table. You can connect the cans to each other with glue, and so that the beer cans do not wrinkle under the weight of the seated person, they can first be filled with sand.

Can alcohol burner

In the tourist community, it is becoming quite popular to use a camping spirit lamp instead of a gas burner. In addition, the weight of the alcohol burner is very small - about 10 grams! Alcohol lamps are made by hand from beer cans.

Read a detailed master class with photos and tips from an experienced tourist.

house made of tin cans

The tin-lined house is located in Houston, Texas. Recently, it was officially recognized as a local landmark of the city, and not surprisingly. More than 50,000 aluminum cans of beer and lemonade were used to build, clad and decorate the house! And that's not counting those that had to be replaced with new ones. The house was built by John Milkovich, who was born during the Great Depression and therefore knew how to save money and not throw anything away. In the 1970s, when aluminum became a common and fashionable material, John began decorating his home with collected beer cans. In the mid-1980s, Milkovich died, but his wife and sons continued his work, updating the cladding. By the way, a fence, outbuildings, a mailbox and even a dog house are also made of cans! In the 2000s, a charitable organization bought the house, completely restored it and opened it to the general public.

Candlestick - a flashlight from a beer can

In order to make such a craft - a garden lantern from a beer can, make even cuts on the bank with a clerical knife every 3-4 cm. For convenience, you can use a ruler. Then gently press on the top of the can to get such a flashlight. If desired, you can paint the candlestick with spray paint.

Decorative crafts from beer cans

It must be warned right away that crafts from tin cans must be done very carefully and preferably with household knitted gloves, until you get used to working with razor-sharp edges. Therefore, it is not recommended to allow small children to work.

Volumetric stars made of aluminum cans

Such crafts from beer cans as stars will become an original children's room or Christmas tree.

Butterflies from beer cans and other figurines

Cut open the jar, cut off the bottom and top to get a flat plate. Cut out the image of a butterfly, bird, flower or other figure from paper, redraw it on a tin plate and pierce it with an awl at the nodal points. Cut out the butterfly along the lines. Give the figure some volume with a pen, screwdriver or pliers. Push light outlines where necessary, round the edges, bend the wings, and so on. Color the butterflies. To do this, you can use paint in a spray can or markers.

Tin, aluminum ... yes, it doesn’t really matter what the numerous cans of coffee, sardines, peas, condensed milk, tomatoes in their own juice and so on are made of. More or less often, but they appear in our homes, and when it's their turn to go towards the garbage dump, we sometimes wonder: isn't such a “thing” useful to us at home, which people and mechanisms worked to create? What can be done from a jar with your own hands - so that it acquires a new function, continues its service and thereby at least a little, at least a little bit, helps the environment? ...

Sometimes their second life turns out to be much brighter, more beautiful and more useful than the real one. It is important to understand that this is not at all about penny savings and not even about ecology, although this issue is also important. Rather, such experiments can be seen as an exercise in the development of creativity, imagination and the ability to look at things with a fresh look. The theme of this issue was ordinary tin cans.

Stationery organizer

Banks, in general, are then invented in order to store something in them. And it may well be various small things from your desktop.

garden lamps

If any celebration is planned in your country house, then such beautiful lamps placed among the trees will give it a very special atmosphere.

Flower pots

From tin cans, you can come up with a million different flower pots that differ in color and size. But the author of this work will easily defeat them all thanks to an unusual creative idea.

Another option with clothespins

“How to make a flower pot out of a sprat can and a pack of clothespins?” - such a question can be asked in quizzes to test ingenuity. But now you know the answer.

For cutlery

From several cans of canned vegetables and a plank, you get a very stylish cutlery stand.

For wine

drums

And even a child can handle this craft. To make these drums, simply pull balloons onto a jar and secure with an elastic band.

Lamps

“Jar” lamps are amazingly simple and can be completed in just a few hours. You will need your skill, accuracy and some free time. But in any case, it can be argued that you will not find such lamps in any store.

Original candlestick

Liquid soap container

If you need to make a durable and reliable container for liquid soap, then a tin can is perfect for this. By clicking on the photo you will see detailed instructions.

Tin cans plus baby socks: work for 10 minutes, including the search for cans and socks.

plus rope

A spectacular and very simple way to make a wonderful flowerpot in just 10 minutes. It is necessary to apply a layer of glue to the outer surface of the jar, and then carefully tie it with a coarse rope. You can also attach tags with plant names.

A tin can, a plastic bottle, some tools, paint and ... you will have an original table lamp. Craft for an amateur, but, you see, the most curious:

Wall(or part of the wall) from lids from cans. And not only surprised, but somewhere even inspired:

As you can see, even empty tin cans can still serve you well.

Here are some more ideas:

It just so happened that a Russian person always has something that he does not need, but it is a pity to throw it away. Old skis on the balcony, a long-broken freezer in the same place, a samovar lying around under the bed. But if you can still take a freezer and a samovar to the country, and go skiing in the winter from a hill in the yard, then what to do with the ever-accumulating number of cans that take up space? We offer you several ways to give ordinary glass jars a second life. Of course, provided that they do not go to the closing of cucumbers, tomatoes and other goodies.

1. Cans can be used to make oil lamps. Fill two-thirds of the jar with kerosene and close the lid. Put a rope in a jar of kerosene and let it soak for about an hour. Make a hole in the lid and pass the rope through it.

2. Container for matches. And the top of the lid can be replaced with a match grater.

3. Cans can also be used to make garlands.

4. Another option.

5. Container for sewing supplies.

6. A set of containers for bathroom accessories. The jars are held on to a piece of wood with picture hangers and pipe clamps.

7. And here is a great way to start seedlings.

8. Children constantly throw small things around? They can be hidden in jars, and plastic animal figures can be glued to the lid.

9. A great way to store yarn. And if you make a small hole in the lid, it will be convenient to get it.

10. For lovers of needlework, a jar is a great way to organize a rich selection of ribbons.

11. Pizza in a can. You can add any ingredients you like to the jar and save until baked. And you can bake pizza in a jar in a deep pan filled with water.

12. Shelf for spices made of glass jars with magnets. This is just an amazing idea if you have anything stainless steel in your kitchen. Pour spices into jars, stick labels on them and glue magnets to the lids.

13. By analogy with spices, buttons can be stored in jars. To store them as shown in the picture, you need to nail the lids to the shelf, fill the jars with the necessary contents and twist them.

14. Vases from cans. Pour the acrylic paint of your favorite color (about 5 cm) into the bottom of a clean, dry can, and then turn the can upside down and slowly turn it so that the paint spreads evenly over the entire inside of the can. True, pouring water into such vases is impossible.

15. You can also spray paint the jars. It is only advisable to work outside or in a well-ventilated area.

16. You can make such candlesticks from cans.

17. If you do not have a chain, you can hang the jar on a rope. Get a more rural atmosphere.

18. In principle, using a jar as a candlestick is elementary simple. Just sprinkle sand or pebbles on the bottom of the jar to keep the candle.

19. Or you can fill the jars with water and put pill candles on them.

20. Cupcakes in a jar. And as an addition to such an unusual gift, give a spoon with a beautiful ribbon.

21. Make a terrarium out of a jar.

22. Well, using jars as salad containers for picnics or barbecues is a thing of the past.

The word "crafts" is perceived as something frivolous: so, pampering. Skepticism increases if junk material is used for them. Let's debunk this myth. You can make some really wonderful things for the garden out of tin cans. They can really become a real decoration of your site. Especially if you use all your creativity and some tips.

Many foods keep best in tins. Here the industry also adjusted their release. The disposal of this container is still lame, and the banks began to accumulate.

Tin is an excellent craft material. It is perfectly cut with simple tools, bends well, lends itself to coloring. When connecting parts from it, there are no problems. Therefore, the craftsmen could not pass by such a find and came up with many ways to reuse this container.

In landscape design, the use of cans is practiced in two directions:

• Production of decor for external design (garden sculpture and artistic elements of the garden);
• Designing practical things (fences, garden furniture and buildings).

It is not always possible to clearly distinguish between them: decorative things can also have a utilitarian purpose, and functional ones can have an aesthetic value. As for the material, tin cans of various sizes and beer cans are popular among craftsmen. They are made from different thicknesses of material and have some differences in use.

What can be made from tin cans

Tea, coffee, flour, biscuits, canned food and liquids are packed in metal containers. There are a few general rules when working with this material:

• You need to work with gloves (sharp edges can damage your hands);
• Only clean jars can be used (do not forget to wash the material and remove the labels).

If you have collected a certain number of cans, then you can start making decor.

Decorative planters for the garden

This is the most common and favorite way for all summer residents to use tin containers. It is better to take larger containers. It's good if you find containers from restaurants.

Manufacturing steps:

1. File the top edges. They are quite sharp and easy to cut. You can bend them with tongs or other tools. The sealant applied to the cut will help to cope with the task.
2. Make drainage holes in the bottom of the jar. To do this, you can use a drill or pierce them with a sharp nail with a hammer.
3. Paint the jar the right color. For better contact of paint with metal, the walls must be rubbed with a metal brush and a primer applied.
4. Decorate the planter according to the style of the site.

Decorative lanterns

With romantic tin lantern garlands, your garden will turn into a fairy tale. They can be used for decorative lighting of a corner for relaxation or hung on trees.

Manufacturing steps DIY lanterns:

1. Fill suitable jars to the top with water and put in the refrigerator in this form. Remove only when the water has completely turned into ice. A frozen can is easier to work with.
2. Draw a pattern on the outer surface of the jar with a marker.
3. Make holes along the marked lines. To do this, use a hammer and a nail.
4. Wait for the water to defrost and erase the marker.
5. The lamp can be painted or even painted.

If you plan to hang the product, then you need to make a handle. To do this, make two additional holes near the upper edge and pull the wire into them. You can put a decorative candle inside the lantern. Such lights look good in groups.

Crafts from cans

There are more and more canned goods on our tables, and the number of cans from them is increasing. They cannot be brought to some kind of standard. They are all different sizes, colors and shapes. This makes it possible to be creative in their use.

Bird feeders and birdhouses

Crafts can benefit your garden. Make a bird feeder or birdhouse out of a jar. There is nothing complicated about this, and the birds will be grateful.

Manufacturing steps:

1. Mark a hole in the can with a marker. Cut it out with a knife.
2. Treat the cuts with silicone or paste over with tape or tape.
3. Decorate the item.

In the photo - bird feeders from tin cans:

garden sculpture

Tin figurines can bring a twist to the decor of your garden. Kids will love this design for sure. In sculptures, it is better to use jars of different sizes and shapes. Canisters, metal buckets, spray cans are also suitable.

Angular material suggests the use of prototypes with the same character. Robots, aliens and lumberjacks made from cans look good. We will consider the technology of manufacturing a lumberjack in more detail.

Materials:

• 1 large jar or canister for the torso;
• 2 pairs of cans for arms and legs;
• 1 bank for the head;
• 2 rectangular cans for shoes;
• Bank for a hat (you can use a watering can).

Manufacturing steps:

1. Pick up the required amount of material.
2. Coat all cans with primer.
3. Paint the parts a light silver color with automotive spray paint. You will need 1-2 cans. It all depends on the size of the lumberjack.
4. Connect parts with bolts and nuts. Holes for them must be pre-drilled in the intended places.

Sometimes holes are made with nails. So that the jar does not wrinkle, you need to put it on a wooden block, and only after that punch holes with a hammer.

A lumberjack can make a girlfriend, collect a dog from cans. Children can be involved in decorating the sculpture. They will better tell you what else your creation lacks.

Crafts from beer cans

Beer cans are aluminum and tin. So it is customary to call not only cans from beer, but also from water and other drinks. All of them have thin walls, are well cut with scissors and are easily deformed. Such a container appeared in the west, and, accordingly, the first crafts were made from it there.

So in Houston, the house of beer cans of John Milkovich was officially recognized as a landmark. The walls of the building are made entirely of beer cans. For cladding, the author used cut cans, which he made flat. All buildings near the house, including the fence and the dog kennel, are also made of cans. The house is habitable. Few people will go to such a construction site, but details can be introduced when decorating a garden plot.

Beer cans are used for:

• Framing devices for sandboxes and flower beds;
• construction of fences;
• Installation of a collector for heating water;
• Facing of roofs of arbors, canopies and other garden constructions;
• Production of garden sculptures and decorative elements.

Flower

Such flowers will decorate the garden even in the cold season. Production will not take much time. You will need super glue, scissors and flower patterns.

Manufacturing steps:

1. Cut the jar lengthwise.
2. Cut off the bottom and top. The canvas is ready to use.
3. Draw on the canvas the petals of the future flower.
4. Cut out the details with scissors. You need to work carefully.
5. Squeeze lines in the form of veins on the petals.
6. Paint the petals and leaves in the desired color. You can use acrylic or oil paint, automotive paint is also suitable.
7. Collect the flower and glue the parts.

Using the same technology, you can make a wide variety of garden decor.

In the photo - a flower from beer cans:

Roof tiles

Banks are so well cut that they are cut into strips and weave different products from them. You can also make silver tiles from a jar cloth. To do this, you need to make a press to give the sheets the desired shape. Suitable form in the form of strips of two parts. They must be joined together so that the sheet between them takes the form of a tile. Make prints on all blanks. Such tiles are fastened with a stapler.

Beer cans fit together well. If you connect several pieces in a row, you can get a pipe. Whole walls are made of such pipes, and buildings are made of them.

More ideas for reusing cans

• Plant tags. Gardeners are resourceful people. Thin tin is easily pressed through with a pointed stick. On strips of beer cans, you can write the name of the variety and attach to the plant. No amount of rain will damage them.
• Brazier. Tourists love to make various mini-braziers from cans. On such a device, you can quickly heat tea or fry a sausage.
• Stilts for children. Two large tin cans turn into stilts when you attach shoelaces to them.
• Drums and other toys. If different cans are connected to each other in the same plane, then you get a drum. Children will appreciate such a musical instrument.
• Skittles or cubes. Painted in jars can be used for games.
• Organizers. A jar is a container, and it is convenient to store tools and all sorts of little things in it.

Use of other jars

Our industry pleases with a variety of packages. Glass containers are also popular in garden design:

• Banks from baby food;
• mayonnaise jars;
• Medicine jars.

Candlesticks from mayonnaise jars

Glass is a good building material. From it they build greenhouses and build houses. While jars are not enough for serious projects, you can make candlesticks.

Manufacturing steps:

1. Tie a wire to the neck of the jar and make a handle out of it.
2. Paint the jar with waterproof paints. You can turn jars into bees, ladybugs or other insects.
3. Put a candle inside. Light a fire and set up a candlestick in the garden. Such lamps are especially good for romantic holidays..

There are more and more jars and jars every year. Inventive summer residents come up with new ways to dispose of this packaging. They prolong the life of things that have become unnecessary, make the site more interesting and comfortable. Such hobbies are welcomed by environmentalists and craftsmen. They agree that good crafts combine aesthetics and functionality. Only in this case, the creation from the cans will delight you and your family for a long time. See also how to craft. Follow the link how to make a caterpillar out of tires for a playground.

What to eat at the cottage in the summer? Of course, you can constantly cook various dishes and salads, but in order to have a quick and satisfying snack, for example, stew is perfect. Have a delicious meal and are going to throw away the jar? Take your time - you can make a lot of exciting and useful things out of it.

To do tin can night light You will need, in addition to herself, sharp metal scissors, needle nose pliers and a drill. First you need to thoroughly wash the base for the night light (jar). Then carefully remove all the sharp edges that remain from the lid, for this you can use needle nose pliers or tin scissors. Using a drill, small holes are made in the jar through which light will penetrate. One hole of larger diameter is made at the base of the jar - a wire is threaded through it, on which light bulbs are attached. This night light can be used in any room. However, it is worth taking care that the power of the light bulb is small, then it will not heat up the body of the night light from a tin can.

Summer is a vacation time for all children. It's time to prepare the author's crafts for the new school year. Do tin can pencil holder quite within the power of anyone who has the desire.

A dry, clean tin can must be coated with a primer. Then we take a piece of foam and cut it into small rectangles. You can also cut letters or various patterns. With the help of acrylic paints, we transform the white pieces of polystyrene into multi-colored tiles and wait for complete drying. Using glue, we attach the colored pieces to the tin, leaving gaps between them. After that, all empty spaces between the tiles and the edges of the can are covered with putty. Excess solution should be removed with a damp sponge. The author's craft from a tin can is ready.

Most housewives who love different flowers often face such a problem - the lack of small pots underground. If you have old tin cans lying around at home, it's time to put them to work.

To make beautiful tin can flower pot You will need a sheet of beautiful paper, glue and scissors. The tin must be thoroughly washed and dried beforehand. A thin layer of PVA glue should be applied to the tin walls. It is needed to fix a sheet of paper on the surface of the jar. A rectangle is cut out of a sheet of paper, which in size coincides with the surface of the can. The paper blank is wrapped around the tin base. The finished product can be decorated with ribbons and additional decorations.

A tin can, a piece of cloth, colored paper and foam rubber - that's all you need in order to make author's pincushion from a tin can. First you need to decide on the height and diameter of the required crafts. Then - choose a tin can and cut off the excess part of the workpiece using metal scissors or needle-nosed pliers. The outer walls of the jar should be decorated with patterned colored paper, gluing it to the tin with PVA glue. A piece of foam rubber is wrapped in fabric and placed in the space of the future needle bed. It is necessary to choose its size in such a way that it does not fall out of the jar. Also, super glue can be used to fix the fabric with foam rubber inside the tin blank.

Now that you can already make a large number of crafts out of tin cans, you should proceed to the "aerobatics". Can Chandelier will not only fulfill its intended purpose, but also decorate your garage or cellar.

To do this, to make this craft with your own hands, you will have to try to apply simple knowledge and skills. The assembly of the frame is the main stage in the manufacture of a chandelier. Banks are welded to each other, forming an asterisk. (You can choose any form of future crafts). A hole is made in the upper tin, and a hook is fixed in it, which will hold the author's chandelier in a suspended state. Then the whole structure is painted in any color of the rainbow of your choice. Painting can be done with a brush or a spray can. Then, through the pre-drilled holes, the wires feeding the light bulbs are threaded. The number of bulbs is selected based on their required level of illumination of the room. When performing electrical work on connecting a finished chandelier from cans to the network, it is necessary to comply with all safety requirements so as not to receive electric shock.

A pencil, a chandelier, a night light and a flower pot - this is not a complete list of crafts that you can make with your own hands from old tin cans. By putting into practice useful tips, you can decorate your house or apartment with author's things that will cost you practically nothing.

In most cases, items made from available materials play the role of room decor, but if you think carefully and connect your imagination, you can get a useful little thing for the home.

Can lamps

From an ordinary drink can, it is easy to make an original ceiling lamp for a lighting fixture. It will be a stylish, useful accessory in your interior. So, in order to make such a craft from a beer can, you first need to cut its bottom with a sharp knife.

Next, on the bank itself, you need to draw patterns. It can be ornaments, geometric shapes, flowers, and much, much more. Then we take a clerical knife and carefully cut out the composition according to the markup. Take precautions when working with cutting objects!

If you have paint and basic drawing skills, then you can paint the base of our future lamp or draw something on it. After finishing the work, all that remains is to place a cartridge with a light bulb in a jar and a unique, beautiful lamp is ready!

Desk lamp

You can make an original table lamp from a beer can. The jar itself will be a stand, and the lampshade for the lamp is made of tongues, for which we open the drink. Using wire cutters, open the tongue in one place and thus connect them together, like links in a chain.

There are many such elements for a lampshade. It is necessary to “weave” a rectangular canvas about 40x15 cm in size. Close the rectangle into a cylinder, install it on the base and mount the bulb holder. This lamp will decorate any apartment.

Crafts from tin cans to give

For a country house or plot, you can also make many decorative elements from aluminum cans. You can even make furniture out of them! For example, a chair. Put the cans on top of each other, connecting them with glue, gradually forming the seat, back and armrests. In the same way, you can build a small table.

To make furniture items stronger and more stable, fill each jar with earth or sand.

Travel burner

You can make a burner out of a half of an iron beer can. This idea will be useful for those who like to travel. Such a burner can completely replace a gas burner, and its weight does not exceed 50 grams, while a gas burner weighs about 3-4 kg.

To make such a useful thing, you need to cut off the bottom with a wall height of about 10 cm. We make one large hole in the middle of the bottom, and several small ones along the edge (along the groove between the bottom and the walls). Sharp edges are slightly bent inward with pliers.

Candlesticks from cans

Iron cans from canned vegetables will fit for making a candlestick. It is enough just to cut some pattern or pattern on them. You can simply make round holes in a chaotic manner and paint the jar in any color. We put a candle inside and enjoy the romance.

Crafts from tin cans for children

Smooth, neat jars, without a sharp edge, can be painted, pasted over with paper or cloth, ribbons, beads, beads and used as a stand for stationery.

If you remove both bottoms and cut the jar lengthwise, then we get an aluminum sheet from which you can make a lot of crafts: butterflies, birds, stars and others. Draw on a sheet of thick paper, or print the finished drawing, cut it out and use it as a template. After manufacturing individual parts, you can give them a look closer to the real one. For example, make incisions on the wings of birds, or the openwork edge of the wings of butterflies and paint them with multi-colored paints.

Possessing creativity, desire and imagination, you can make many items that will warm and please the eye. Thus, you can make a gift for a loved one, because there is nothing better than a present made in the hand made style.